Whirlpool Washer Water pump WPW10297344, Replaces W10297344, Fixes Washer will not drain or leaves standing water
Whirlpool OEM washer water pump/drain pump. The requested WPW10297344 is the documented successor to OEM part W10297344.
Whirlpool OEM washer water pump/drain pump. The requested WPW10297344 is the documented successor to OEM part W10297344.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Slow or incomplete draining
- Standing water remaining in the tub
- Unusual pump noise during the drain portion of the cycle
- Washer may stop or fail to advance when the water-level system does not detect adequate draining
Check Before Replacing
- Disconnect electrical power before inspecting the pump, hoses, or wiring.
- Check the accessible drain hose and pump inlet for kinks, clothing, coins, or other obstructions; do not assume the pump is defective until blockages are excluded.
- Inspect the pump electrical connector and wiring for looseness, damage, or corrosion.
- If the pump is clear but remains noisy during drain operation, follow the appliance model's service procedure for pump testing or replacement.
- Use an ohmmeter only with power disconnected and only against the resistance specification in the applicable washer service documentation; do not apply external power to the pump.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM washer water-pump assembly
- Designed for the drain function on select Whirlpool-family residential washers
- Manufacturer part number: WPW10297344
- 220 V, 60 Hz pump assembly specification is listed by an established Whirlpool parts distributor
- Replaces prior OEM number W10297344
Installation Notes
- Disconnect power before beginning installation and address any residual water safely before removing pump connections.
- Install only after confirming the washer model's parts diagram identifies WPW10297344.
- Transfer or reconnect the pump hoses and electrical connector exactly as shown in the applicable model-specific service documentation; avoid stressing the hose connections or wiring.
- After installation, inspect for leaks and run an appropriate drain/fill test before returning the washer to service.
Verified Compatible Models
4GATW4900YW0, 4GATW4900YW1, 4GATW4900YW2, 4GMVWC100YQ0, 4GMVWC100YQ1, 4GMVWC300YW0, 4GMVWC300YW1, 4GMVWC300YW2, 4GMVWC400YW0, 4GMVWC400YW1, 4GMVWC400YW2, 4GMVWX500YW0, 4GMVWX500YW1, 4GMVWX500YW2, 4GNTW4400YQ0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
