Whirlpool Washer Water pump WPW10297344, Replaces W10297344

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Slow or incomplete draining
• Standing water remaining in the tub
• Unusual pump noise during the drain portion of the cycle
• Washer may stop or fail to advance when the water-level system does not detect adequate draining

Check Before Replacing

• Disconnect electrical power before inspecting the pump, hoses, or wiring.
• Check the accessible drain hose and pump inlet for kinks, clothing, coins, or other obstructions; do not assume the pump is defective until blockages are excluded.
• Inspect the pump electrical connector and wiring for looseness, damage, or corrosion.
• If the pump is clear but remains noisy during drain operation, follow the appliance model's service procedure for pump testing or replacement.
• Use an ohmmeter only with power disconnected and only against the resistance specification in the applicable washer service documentation; do not apply external power to the pump.

Pro Tip

Part Details

Installation Notes

• Disconnect power before beginning installation and address any residual water safely before removing pump connections.
• Install only after confirming the washer model's parts diagram identifies WPW10297344.
• Transfer or reconnect the pump hoses and electrical connector exactly as shown in the applicable model-specific service documentation; avoid stressing the hose connections or wiring.
• After installation, inspect for leaks and run an appropriate drain/fill test before returning the washer to service.

Verified Compatible Models

4GATW4900YW0, 4GATW4900YW1, 4GATW4900YW2, 4GMVWC100YQ0, 4GMVWC100YQ1, 4GMVWC300YW0, 4GMVWC300YW1, 4GMVWC300YW2, 4GMVWC400YW0, 4GMVWC400YW1, 4GMVWC400YW2, 4GMVWX500YW0, 4GMVWX500YW1, 4GMVWX500YW2, 4GNTW4400YQ0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.