WW01F02058 Washer Tub Assembly

GE Washer Tub Assembly WW01F02058, Fixes Cracked or Leaking Outer Tub

Sale price
$99.95
Regular price
$119.22
You save
$19.27 (16%)

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →
OEM REPLACEMENT PART

GE Washer Tub Assembly WW01F02058

Part# WW01F02058 No verified predecessor Fits GE Fits Mabe 🇺🇸 U.S. Part# WW01F02058

WW01F02058 GE and Mabe Washer Outer Tub Assembly, Restores Water Containment and Tub Support

Washer tub cracked, deformed, or leaking directly from the tub body or seam? WW01F02058 is a genuine GE and Mabe top-load washer tub assembly used on select washer models. The outer tub contains wash water and supports the basket and related tub components within the washer cabinet. Replace the assembly when inspection confirms that the original tub is cracked, physically damaged, deformed or leaking directly from the tub body or seam. ⚡ Replace only when physical inspection confirms that the original tub is damaged or leaking. Part WW01F02058 restores water containment and tub support when the defective assembly is correctly diagnosed and replaced.

❓ Is This the Right Part?

Confirm the exact source of the leak, vibration or noise before ordering. This is the correct assembly if ALL of the following are true:

  • ✔ Physical inspection confirms the tub is cracked, damaged or leaking at the tub body or seam
  • ✔ Hoses, drain pump, suspension rods, seals and basket components have been ruled out as the source
  • ✔ Washer is confirmed level and properly installed
  • ✔ Complete model number and revision confirm WW01F02058 is the correct tub for your washer

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

  • Water leaking from the tub body or seam during or after the wash cycle
  • Visible cracks, deformation or physical damage to the outer tub
  • Excessive vibration or noise traced to tub damage rather than suspension or balance
  • Washer not retaining water correctly during the wash fill

✔ Water leaks, excessive vibration and unusual washer noise can also result from hoses, the drain pump, suspension rods, seals, the transmission, basket components or installation and levelling problems — confirm the source of the fault before ordering the tub.

📦 Part Details

  • Part Number: WW01F02058
  • Reference Number: 233D2316G002 (engineering / production reference)
  • Type: Top-load washer outer tub assembly
  • Replaces: No verified previous OEM number found
  • 🇺🇸 Matching U.S. Part Number: WW01F02058
  • Brands: GE Appliances, Mabe
⚠️ Inspect All Accessible Components While the Tub Is Out:
With the tub assembly removed, inspect all accessible tub, drive and suspension components and replace only parts confirmed worn or damaged. The exact components included with WW01F02058 can vary according to how the part is supplied — review the product photographs and included-parts list before ordering.

⚙️ Installation

Skill Level: Advanced — qualified appliance technician recommended. Disconnect electrical power and shut off the water supply before servicing the washer. Tub replacement requires major cabinet disassembly and is normally completed by a qualified appliance technician. Repair time varies significantly by model, tooling and included components. Confirm the replacement tub matches all mounting points, transmission connections and accessory components for your specific model revision before installation.

✓ Compatible Models

Confirmed compatible with GTW302BMP1WW, GTW330BMM1WW, LGA79003CBFU11, LGA79113CBAB01, LGA79113CBDB01, LMA71103CBFU40, LMA71115CBCU01, LMA71215VBAB02, MTW201BMR0WW, WMA72215CGDB01. Confirm the complete washer model and revision because similar GE and Mabe washers may use different tubs, mounting points, transmission connections and accessory components. Contact us to verify your model number before ordering.

💡 Pro Tip

Photograph the Original Assembly Before Disassembly:
Before removing the original tub, photograph all hose connections, wiring routing, mounting points and component positions from multiple angles. GE and Mabe top-load tub assemblies involve multiple interconnected components — reference photos prevent incorrect reassembly and avoid a repeat service call.

✓ Model-Specific Repair Pages

✅Compatibility & Cross Reference

GTW302BMP1WW, GTW330BMM1WW, LGA79003CBFU11, LGA79113CBAB01, LGA79113CBDB01, LMA71103CBFU40, LMA71115CBCU01, LMA71215VBAB02, MTW201BMR0WW, WMA72215CGDB01

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions