Dishwasher Vibrating, Rocking, or Leaking at the Base? Leveling Foot 00617585 – Fix Instability Fast
A dishwasher that vibrates excessively, rocks during operation, or sits unlevel is almost always missing or has a broken leveling foot. In Bosch, Thermador, and Kenmore dishwashers, the leveling foot threads into the base of the unit and allows precise height adjustment to keep the appliance stable and level on any floor surface — when it cracks, strips, or goes missing, the dishwasher rocks during cycles, can leak at the door seal, and may cause noise complaints. ⚡ One of the most overlooked causes of dishwasher door seal leaks and vibration noise. Part 00617585 is the genuine OEM replacement leveling foot that restores full stability and proper leveling adjustment — direct replacement for 617585, no modification required.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your dishwasher rocks, vibrates excessively, or sits visibly unlevel
- ✔ One or more of the existing leveling feet are cracked, stripped, or missing
- ✔ The dishwasher door seal is leaking and the unit is not sitting level
- ✔ ONLY problem is instability, rocking, or inability to level the appliance
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dishwasher rocks or wobbles during wash and drain cycles
- Excessive vibration or rattling noise during operation
- Dishwasher sits visibly unlevel from front to back or side to side
- Door seal leaking water onto the floor (caused by unlevel unit)
- Leveling foot visibly cracked, broken, or missing entirely
- Unable to adjust dishwasher height — foot threads are stripped
✔ If these symptoms match, the leveling foot is the most likely failed component in the system.
✔ In most cases, replacing the leveling foot with 00617585 restores full stability and eliminates vibration immediately.
📦 Part Details
- Part Number: 00617585
- Type: Genuine OEM Bosch/Thermador Dishwasher Leveling Foot (Adjustable)
- Replaces: 617585 — no modification required
- Brands: Bosch, Thermador, Kenmore
Dishwashers have four leveling feet — two front-adjustable and two rear. If one foot is cracked or stripped, the others are likely the same age and under the same stress. Consider replacing all four at the same time to ensure even leveling and prevent a repeat repair within months.
⚙️ Installation
Skill Level: EASY — Allow 10–15 minutes. No need to disconnect power for foot replacement. Pull the dishwasher forward slightly to access the base. Thread the new leveling foot into the mounting hole at the base of the unit and adjust height by turning clockwise (lower) or counter-clockwise (raise) until the dishwasher sits level and stable. Use a level tool across the door opening to confirm. Push the dishwasher back into position and verify it no longer rocks.
✓ Compatible Models
Confirmed compatible with Bosch SHE, SHX, SHV, SHP, SHS series dishwashers, Thermador DWHD series, and Kenmore 630 series. Contact us to verify your model number before ordering.
💡 Pro Tip
When reinstalling leveling feet, always level the dishwasher front-to-back first using the front adjustable feet, then check side-to-side. A dishwasher that's even slightly out of level front-to-back will cause water to pool at the wrong end of the tub, leading to poor wash performance and premature pump wear. A $10 foot replacement and 10 minutes of leveling can add years to your dishwasher's life.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
