Dishwasher Not Filling? Water Inlet Valve 00622058 – Fix No-Fill Fast

If your Bosch dishwasher isn't filling with water or stops mid-cycle, the water inlet valve is the most common culprit. In most Bosch-built dishwashers, this is caused by a failed timed-fill water inlet valve. When it fails, the dishwasher cannot draw water from the supply line — leaving dishes unwashed and the cycle incomplete. ⚡ Common failure point in Bosch-built dishwashers. Part 00622058 is the genuine OEM replacement that restores proper water flow and full wash cycle operation immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Dishwasher powers on and control panel responds normally
• ✔ Drain pump and wash motor function correctly
• ✔ Household water supply valve is fully open and pressure is adequate
• ✔ ONLY problem is the dishwasher not filling with water or filling too slowly

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Dishwasher not filling with water — cycle starts but tub stays dry
• Dishwasher fills very slowly or only partially
• Dishwasher starts then stops immediately after door closes
• Humming sound at start of cycle but no water enters tub
• E24 or E25 error code on control panel
• Dishes come out dirty or dry — cycle ran without water

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this water inlet valve restores normal operation immediately.

📦 Part Details

• Part Number: 00622058
• Type: Dishwasher Timed-Fill Water Inlet Valve — 120V solenoid-operated, Rast 5 electrical terminals
• Replaces: 622058 (direct supersession — no modification required)
• Brands: Bosch, Siemens, Gaggenau, Thermador (BSH-built units)

⚙️ Installation

Skill Level: MODERATE — 30–45 minutes. Disconnect power and shut off the water supply before beginning. Remove the lower access panel, disconnect the water supply line and wire harness from the old valve, then mount the new valve and reconnect. Ensure all hose clamps are snug and check for leaks on first fill cycle.

✓ Compatible Models

Confirmed compatible with S35KMK35UC-64, SHE3AR52UC/06, SHE3AR52UC/07, SHE3AR55UC/06, SHE3AR55UC/07, SHE3AR56UC/06, SHE3AR56UC/07, SHE3AR72UC/06, SHE3AR72UC/07, SHE3AR75UC/06, SHE3AR75UC/07, SHE3AR76UC/06, SHE3AR76UC/07, SHE43R52UC/64, SHE43R55UC/64, SHE43R56UC/64, SHE55R52UC/64, SHE55R55UC/64, SHE55R56UC/64, SHE68R52UC/63, SHE68R55UC/63, SHE68R56UC/63, SHE6AF02UC/06, SHV43R53UC/64, SHV55R53UC/64, SHV68R53UC/63, SHX33R55UC/64, SHX3AR52UC/06, SHX3AR52UC/07, SHX3AR55UC/06, SHX3AR55UC/07, SHX3AR56UC/06, SHX3AR56UC/07, SHX3AR72UC/06, SHX3AR72UC/07, SHX3AR75UC/06, SHX3AR75UC/07, SHX3AR76UC/06, SHX3AR76UC/07, SHX43R52UC/64, SHX43R55UC/64, SHX43R56UC/64, SHX55R52UC/64, SHX55R55UC/64, SHX55R56UC/64, SHX65P06UC/63, SHX68R52UC/63, SHX68R55UC/63, SHX68R56UC/63 plus additional Bosch, Siemens, Gaggenau, and Thermador models. Contact us to verify your model number before ordering.

💡 Pro Tip