WASHER HAS WATER-FILLING PROBLEMS
Frigidaire / Electrolux Washer water inlet valve assembly 134637810, Replaces 134637800, 7134637800, 7134637810, Fixes Washer has water-filling problems
Genuine OEM four-solenoid water inlet valve assembly that controls water flow into compatible front-load washing machines.
Part 134637810Replaces 134637800, 7134637800, 7134637810Frigidaire / Electrolux
Genuine OEM four-solenoid water inlet valve assembly that controls water flow into compatible front-load washing machines.
Is This the Right Part?
Part Number134637810
Replaces134637800, 7134637800, 7134637810
ManufacturerFrigidaire / Electrolux
Appliance TypeWasher
Part TypeWasher water inlet valve assembly
✅ Cross Reference Information
Current Part Number134637810
Replaces134637800, 7134637800, 7134637810
Common Symptoms
- Washer does not fill with water.
- Washer fills slowly or inconsistently.
- Water continues entering the tub when the washer is not in use if the valve does not close properly.
- Leakage or visible damage at the valve assembly may be present.
Check Before Replacing
- Confirm both household water supply valves are fully open and that the inlet hoses are not kinked.
- With power disconnected and water supplies shut off, inspect the inlet connections and accessible valve area for cracks, loose connections, or evidence of leakage.
- Check accessible inlet screens for blockage before attributing a no-fill or slow-fill condition to the valve.
- If water enters the tub while the washer is off or unplugged, shut off the household water supplies promptly; a valve that is not closing is one possible cause.
Pro Tip
A no-fill symptom is not conclusive by itself: first verify water supply, hose condition, and inlet-screen flow restrictions. Continued filling with the washer unpowered is a more valve-specific indicator, but water should be shut off immediately.
Part Details
Part Number134637810
Part TypeWasher water inlet valve assembly
ManufacturerFrigidaire / Electrolux
Appliance TypeWasher
Primary FunctionControls the flow of incoming water into the washer during filling.
Cross References134637800, 7134637800, 7134637810
Key Features
- Genuine OEM washer water inlet valve assembly.
- Electrically operated valve assembly that controls incoming water flow.
- Four-solenoid, two-inlet, three-outlet, 120-volt configuration is documented by a technical retailer listing.
Installation Notes
- Disconnect electrical power and shut off the washer water supply before installation.
- Wear work gloves when handling the part.
- Verify the exact washer model accepts part 134637810 before installation.
- After reconnecting the water lines and electrical connections, check for leaks during a controlled fill test.
Verified Compatible Models
41741100000, 41741101000, 41741102000, 41744130000, 41744131000, 41744132000, CFW7700LR0, CFW7700LW0, EIFLS55IIW0, EIFLS55IIW1, EIFLS55IMB0, EIFLS55IMB1, EIFLS55IRR0, EIFLS60JIW0, EIFLS60JMB0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
