LG Stator Assembly / Washer Motor Stator Assembly with rotor-position sensor 4417EA1002Y, Replaces 4417FA1994F, 4417FA1994G

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drum does not rotate during wash or spin
• Washer stops shortly after starting with an LE error
• Motor may buzz or attempt to move without turning the drum
• Intermittent tumbling or spinning caused by stator, Hall-sensor, rotor, or wiring faults

Check Before Replacing

• Disconnect electrical power before inspecting the motor area.
• Confirm the symptom and any displayed motor-related error code; an LE code alone does not prove the stator is defective.
• With power disconnected, inspect the stator and Hall-sensor harness connectors for looseness, damaged terminals, or visible wire damage.
• If the motor is already accessible, visually inspect the stator windings and rotor magnets for scorching, cracking, rubbing, or other obvious damage.
• Check that the drum rotates freely by hand and that there is no obvious mechanical obstruction before condemning the motor assembly.

Pro Tip

Part Details

Installation Notes

• Disconnect power before servicing and use care around the heavy rotor and sharp metal components.
• The rotor must be removed to access the stator; disconnect the motor and Hall-sensor wiring before removing the stator.
• Route and reconnect the wiring exactly as originally installed, ensuring connectors are fully seated.
• Inspect the rotor and stator for contact or damage before reassembly, then verify washer operation with a suitable test cycle.

Verified Compatible Models

31402, 31412, 31623, 41162, 41172, 41373, 41383, F12A1FD, F12A1FDP, GCWP1069CS, GCWP1069LS, GCWP1069QS, WM2044CW, WM2133C, WM2133CW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.