⚠ This part has been superseded by a newer OEM part number.
5220FR2075L has been replaced by 5221ER1003A. We recommend ordering the current part for guaranteed fit and full lifespan.
Order 5221ER1003A Instead →5220FR2075L LG Washer Water Inlet Valve – Your Washer Won’t Fill, Shows IE Error, or Fills Too Slowly Because This Part Has Failed
The 5220FR2075L is the original LG water inlet valve for front-load washers — a dual-solenoid assembly that controls both hot and cold water intake. LG has superseded this part number to 5221ER1003A, but the function and fit are identical. When this valve fails, the washer won’t fill, throws an IE (Inlet Error) code, or fills so slowly the cycle times out. We carry OEM used pulls, XPart aftermarket new, and Universal new options to fit every budget and repair scenario.
✓ Is This the Part You Need?
This is the correct part if your LG front-load washer is displaying an IE error code, not filling with water, filling too slowly, or stopping mid-cycle waiting for water. The original part number is 5220FR2075L — superseded by 5221ER1003A. Both numbers refer to the same valve. If your model starts with WM, WD, F, or GCWF and you’re seeing a fill-related fault, this valve is the most common cause. Contact us if you want us to confirm fit before ordering.
⚠️ Symptoms This Part Fixes
- Washer won’t fill with water at all
- IE error code (Inlet Error) on display
- Washer fills too slowly — cycle times out waiting for water
- Cycle stops mid-wash waiting for water level
- Washer runs but drum never gets wet
- Washer fills with only hot or only cold water
✓ Part Details & Cross-References
- Original Part Number: 5220FR2075L
- Superseded To: 5221ER1003A (same valve, current OEM number)
- XPart Aftermarket SKU: WV1003A
- Design: Dual solenoid — controls hot and cold water independently
- Includes: Inlet screens at each hose connection point
- Fit: Direct replacement — no modifications required
- Compatible Brands: LG, GE, and related front-load washers (WM, WD, F, GCWF series)
✓ Buying Options
OEM Used (5220FR2075L): A genuine LG factory valve pulled from a working machine. Tested and functional. Best value for budget-conscious repairs where OEM provenance matters.
XPart Aftermarket New (WV1003A): A premium aftermarket replacement engineered to the same dual-solenoid specification and flow rate as the OEM valve. Direct fit, no modifications required. Full new-part warranty. Not affiliated with, sponsored by, or endorsed by LG or any OEM manufacturer.
Universal New (5220FR2075LCM): A compatible universal inlet valve for this application. Suitable for repairs where exact OEM spec is not required. Confirm fit with us before ordering if unsure.
⚙️ Installation Notes
- Skill Level: Moderate DIY — no special tools required
- Time: 30–45 minutes
- Unplug the washer and shut off both hot and cold water supply valves before starting
- Pull washer away from wall and remove the rear access panel (4–6 screws)
- Locate the inlet valve at the top rear where supply hoses connect
- Disconnect supply hoses (have a towel ready for residual water)
- Disconnect the wiring harness from both solenoids, remove mounting screws, swap the valve
- Reconnect hoses and wiring, restore power and water, run a test fill cycle
- ⚠ Torque Note: Hand-tight plus ¼ turn on hose connections — do not overtighten or you risk cracking the valve body
✓ Model-Specific Repair Pages
Don’t see your model? Contact us and we’ll verify fit before you order.
✓ Frequently Asked Questions
Is 5220FR2075L the same as 5221ER1003A? Yes — 5220FR2075L is the original part number. LG superseded it to 5221ER1003A. The valve is functionally and dimensionally identical. Either number will get you the correct part.
What does the IE error code mean on an LG washer? IE stands for Inlet Error — the washer failed to fill to the required water level within the allotted time. The inlet valve is the most common cause. See our full guide: LG Washer Not Filling With Water – Fix.
What’s the difference between OEM Used, XPart New, and Universal New? OEM Used is a genuine LG pull from a working machine — lowest cost, OEM provenance. XPart New is a premium aftermarket valve built to OEM spec — new condition, full warranty. Universal New is a compatible valve for budget repairs where exact OEM spec isn’t required.
What if I replace the valve and the washer still shows IE? Check the pressure sensor and its connecting hose next — a clogged or disconnected pressure sensor hose can also cause fill errors. Contact us and we’ll help diagnose further.
Is this a DIY repair? Yes — moderate difficulty. The valve is accessible through the rear panel without major disassembly. Total time: 30–45 minutes. Contact us if you need model-specific guidance.
Why Order From XPart Supply?
✓ Canadian-based appliance parts supplier — fast shipping across Canada & USA
✓ OEM, aftermarket, and used options on most parts
✓ Real humans available to confirm fit before you order — contact us
✓ Secure checkout · Tracked shipping · No-hassle returns
The rear panel is already off and the valve is out — take 5 minutes to inspect the pressure sensor hose that runs from the tub to the pressure switch. If it’s kinked, cracked, or clogged with mineral buildup, it will cause the same IE error even with a brand-new inlet valve. Replacing both in one service call saves a second labour visit and a second trip to the parts store.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
