Menu
If water is pooling on your kitchen floor after every wash cycle, a failed bottom door gasket is almost always the cause. In most Frigidaire dishwashers, this is caused by a cracked, hardened, or deformed door gasket. When it fails, water escapes from the base of the door during every cycle, risking damage to cabinetry, flooring, and the dishwasher's electrical components. ⚡ Common failure point in Frigidaire-built dishwashers. Part 5304500204 is the genuine OEM replacement that restores a watertight seal at the door base and stops leaks for good.
This is the correct fix if ALL of the following are true:
Not sure? Send us your model number — we'll confirm before you order.
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this door gasket restores a watertight seal immediately.
Skill Level: EASY — 15–30 minutes. Disconnect power before servicing. Open the dishwasher door fully. Peel the old gasket free from its channel along the base of the door interior, starting from the centre and working outward. Clean the channel thoroughly to remove residue. Press the new 5304500204 gasket firmly into the channel from centre to each end. Run a short rinse cycle to confirm the seal is watertight before returning to normal use.
Confirmed compatible with select Frigidaire and Electrolux dishwasher models. Contact us to verify your model number before ordering.
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.