Electrolux / Frigidaire Washer Pump Assembly, Drain, Jet System 5304514775, Replaces 5304505248, 5304509619, Fixes Washer does not drain or drains poorly
Genuine OEM washer drain-pump assembly (also cataloged as a drain jet-system pump assembly). It removes water from the washer during the drain cycle; retailer documentation describes the assembly as including the pump and mounting bracket.
Genuine OEM washer drain-pump assembly (also cataloged as a drain jet-system pump assembly). It removes water from the washer during the drain cycle; retailer documentation describes the assembly as including the pump and mounting bracket.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Standing water remains in the tub after a drain or spin cycle.
- Drain cycle is unusually slow.
- Loud or abnormal noise occurs while the washer is draining.
- Water leaks from the pump area.
- Washer may stop mid-cycle when water cannot be evacuated.
Check Before Replacing
- With the washer unplugged, inspect the accessible drain-pump filter or coin trap, if equipped, for lint, coins, or other obstructions.
- Inspect the external drain hose for kinks, blockage, or improper routing before condemning the pump.
- During a drain cycle, observe whether water exits the drain hose and listen for abnormal pump noise; do not assume the pump is defective without ruling out hose or filter restrictions.
- Inspect the pump area and hose connections for visible leakage, cracks, or loose connections.
- Use the appliance's model-specific service diagnostics or electrical test procedure only if the applicable service documentation specifies the procedure and limits.
Pro Tip
Part Details
Key Features
- Genuine OEM Electrolux/Frigidaire washer drain-pump assembly.
- Cataloged as a pump assembly for the drain jet system.
- Assembly documentation identifies the pump and mounting bracket as included components.
- Used in compatible Electrolux and Frigidaire washers and washer/dryer combinations.
- Replaces OEM numbers 5304505248 and 5304509619, as preserved in the trusted archive.
Installation Notes
- Disconnect electrical power before installation.
- Wear work gloves because access areas inside washers may contain sharp edges.
- Confirm the full appliance model number before installation.
- Reconnect the pump's hose connections and electrical harness exactly as found, ensuring hoses are not kinked.
- After installation, run an appropriate drain test and inspect the pump and hose connections for leaks before returning the appliance to service.
Verified Compatible Models
EFLS517SIW0, EFLS517STT0, EFLS527UIW0, EFLS527UIW1, EFLS527UIW2, EFLS527UTT0, EFLS527UTT1, EFLS527UTT2, EFLS617SIW0, EFLS617STT0, EFLS627UIW0, EFLS627UIW1, EFLS627UIW2, EFLS627UTT0, EFLS627UTT1, EFLS627UTT2, EFLS628WTT00, ELFG7637BT0, ELFG7637BW0, ELFW7537AT0, ELFW7537AT1, ELFW7537AW0, ELFW7537AW1, ELFW7537AW2, ELFW7626BW0, ELFW7637AT0, ELFW7637AT1, ELFW7637AT2, ELFW7637AW0, ELFW7637AW1, ELFW7637BT0, ELFW7637BT1, ELFW7637BW0, ELFW7637BW1, ELFW7738AA0, ELFW7738AW0, ELTE760CAT0, ELTE760CAW0, ELTE7600AT, ELTE7600AT0, ELTE7600AW, ELTE7600AW0, ELTG7600AT, ELTG7600AT0, ELTG7600AW, ELTG7600AW0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
