Is This the Part You Need?
The door lock switch (also called the door latch assembly) does two jobs: it physically latches the door closed and sends the signal to the control board that it’s safe to start a cycle. When it fails, your washer won’t start, throws a door lock error code, or stops mid-cycle with the door locked shut. Part DC64-00519B is the OEM replacement door lock switch that restores proper locking, cycle start, and door release on Samsung front-load washers and compatible models. Note: this part has been discontinued and is no longer available. Contact us to discuss alternatives.
Symptoms
- Washer won’t start — door lock error code displayed (dE, dE1, dE2, dL)
- Door won’t lock or latch when starting a cycle
- Door locked and won’t open at end of cycle
- Washer stops mid-cycle with door lock fault
- Door lock clicks repeatedly but cycle won’t begin
- Washer starts but immediately pauses or cancels
Part Details
- Part Number: DC64-00519B
- XPart SKU: ES519B
- Replaces: 34001265, 8181700, 8182634
- Type: Washer Door Lock Switch / Door Latch Assembly
- OEM: Genuine Samsung part
- Compatible Brands: Samsung, Whirlpool, Kenmore
- Status: Discontinued — No Longer Available (NLA)
Installation Notes
- Skill Level: Intermediate — basic hand tools required
- Disconnect power to the washer before beginning any repair
- Access the door lock by removing the door boot seal and front panel
- Disconnect the wiring harness from the old lock before removing it
- Secure the new lock in place, reconnect the harness, and reassemble in reverse order
- Run a test cycle to confirm the door locks, cycle starts, and door releases normally
Compatible Models
WF218ANW/XAA, WF306LAW/XAA, WF338AAB/XAA, WF410ANWXAA, WF328AAR/XAA, WF520ABP/XAA, WF520ABP/XAC, WF457ARGSG, WF419AAW/XAA, WF42H5400AF/A2, WF350ANW/XAA, WF448AAP/XAA, WF206BNW/XAA, WF42H5200AW/A2, WF42H5000AW/A2, WF448AAP/YE, WF410ANR/XAA, WF461ABW/XAA, WF511ABW/XAA, WF330ANB/XAA, WF218ANB/XAC, WF218ANB/XAA, WF218ANW/XAC, WF328AAG/XAA, WF461ABP/XAA, WF330ANW/XAA, WF419AAU/XAA, WF350ANR/XAA, WF229ANG/XAC, WF328AAW/XAA, WF448AAE/XAA, WF438AAR/XAA, WF520ABW/XAA, WF511ABR/XAA, WF410ANW/XAA, WF448AAP/XAC, WF455ARGSGR/AA, WF218ANS/XAC, WF431ABW/XAA, WF209ANW/XAA, WF448AAW/XAC, WF431ABP/XAA, WF338AAW/XAA, WF457ARGSWR/AA, WF219ANB/XAA, WF409ANR/XAA, WF219ANW/XAA, WF409ANW/XAA, WF331ANW/XAA, WF337AAG/XAA, 11042822200, 11042822201, 11042824200, 11042824202, 11042824203, 11042826201, 11042834200, 11042836201, 11042922203, 11042924202, 11042926201, 11042926220, 592-49006/0001, 592-49045, 592-49052, 592-49075, 592-49082, 592-49087, 592-49376/0001, 592-49396/0001.
Before replacing the door lock, inspect the wiring harness connector at the lock assembly. Burnt pins, corroded terminals, or a loose connector are a common cause of door lock error codes and are often mistaken for a failed lock. Clean or reseat the connector first — if the error persists, then replace the lock. Also check for error codes in the washer’s diagnostic mode to confirm the fault is isolated to the door lock circuit before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
