Samsung Range Surface Element Control Switch DG44-01004A

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• The associated surface element does not heat when selected.
• The associated element heats but does not regulate output as the knob setting changes.
• The associated element continues heating after its control is turned to Off.

Check Before Replacing

• Identify whether the problem is isolated to the surface element controlled by this knob; other element problems do not by themselves identify this switch as failed.
• Disconnect range power at the plug or house circuit breaker before inspection.
• With power disconnected, inspect the switch's accessible wire terminals and connectors for looseness, heat damage, or corrosion.
• With power disconnected and following the range's service information, check the associated surface element for continuity; an open element can cause a no-heat symptom independently of the switch.
• Inspect the control knob and switch shaft for damage or poor engagement before attributing an incorrect setting response to the switch.

Pro Tip

Part Details

Installation Notes

• Disconnect power by unplugging the range or switching off the house circuit breaker before installation.
• Wear work gloves to protect hands during replacement.
• Confirm the exact range model and correct control position before installing; this is a model-specific surface-element switch.
• Transfer wiring carefully according to the appliance's wiring arrangement or qualified-service guidance; do not guess terminal locations.

Verified Compatible Models

FCQ321HSUW, FCQ321HSUWXAC, FCQ321HSUX/XAA-0000, FCQ321HTUB/XAA-00, FCQ321HTUW/XAA-00, FCQ321HTUX/XAA-0000, FER400SB, FER400SBXAC, FER400SW, FER400SWXAC, FER400SX, FER400SXXAC, NE59K3310SB, NE59K3310SS, NE59K3310SW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.