Samsung Range Burner Not Responding? Surface Element Control Switch DG44-01009A – NLA, Contact Us for Alternatives

If your Samsung range surface element won't heat or respond to the control knob, the surface element control switch is the most common cause. In most Samsung freestanding ranges, this switch routes power to the front left and right surface elements based on knob position. When it fails, the element may not heat at any setting, heat at only one level, or fail to shut off. ⚡ Common failure point in Samsung-built ranges. Part DG44-01009A is the genuine OEM switch — this part is now discontinued. Contact us and we will help locate a compatible alternative or cross-reference.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and oven functions normally
• ✔ Other surface elements heat correctly
• ✔ Wiring harness and element coil have been inspected and are intact
• ✔ ONLY problem is one or both front surface elements not responding to the control knob

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Front left or right burner won't heat at any setting — most common customer complaint
• Element heats at only one level regardless of knob position
• Burner won't shut off when knob is turned to OFF
• Intermittent heating — element cuts in and out during use

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this surface element control switch restores normal burner operation immediately.

📦 Part Details

• Part Number: DG44-01009A
• Type: Surface Element Control Switch — routes power to front left and right surface elements
• Cross-References: DG44-01009ACM (no modification required)
• Brands: Samsung
• Status: NLA — Discontinued. No longer available from Samsung. Contact us for alternatives.

⚙️ Installation

Skill Level: Moderate — 20 to 35 minutes. Disconnect power at the breaker or unplug the unit before beginning. Remove the control panel fascia to access the switch mounting bracket; disconnect the wiring harness, swap the switch, and reconnect. Verify knob alignment and full range of motion before reassembling the panel.

✓ Model-Specific Repair Pages

NE59R6631ST/AA, NE59R6631SG/AC, NE59R6631SG/AA, NE59R6631SS/AC, NE59R6631SS/AA, NE597R0ABSR/AC, NE597R0ABSR/AA, NE595R0ABWW/AA, NE594R0ABSR/AA, NE58H9950WS/AA, NE58K9500SG/AC, NE58F9500SS/AC, NE59N6650SS/AA, NE59J7650WS/AA, NE59N6650SG/AA, NE59N6630SS/AA, NE59N6630SG/AA, NE58K9500SG/AA, NE595R0ABSR/AC, NE595R0ABSR/AA, NE59J7651WS/AC, NE59J7850WS/AC, NE59J7850WS/AA, NE59J7850WG/AC, NE59J7850WG/AA, NE59J7750WS/AC, NE59J7750WS/AA, NE59J7630SW/AA, NE59J7630SS/AC, NE59J7630SS/AA, NE59J7630SG/AA, NE59J7630SB/AA, NE58F9710WS/AC, NE58F9710WS/AA, NE59T4311SG/AA, NE59R4321SG/AA, NE59T4311SS/AC, NE59T4311SS/AA, NE59T7511SG/AA, NE59R4321SS/AA, NE59T4321SW/AA, NE59R4321SS/AC, NE59M4320SB/AA, NE59M4320SG/AA, NE59M4320SS/AA, NE59M4310SS/AA

💡 Pro Tip