Dryer Not Tumbling? W10545923 Drum Assembly – Fix No-Tumble Fast
If your Maytag or Whirlpool dryer runs but clothes aren't tumbling, the drum assembly is the most likely cause. In most Maytag and Whirlpool dryers, this is caused by a failed or cracked drum assembly. When it fails, the drum stops rotating — clothes sit in a stationary drum, come out wet, and heat builds up with no airflow. ⚡ Common failure point in Maytag-built dryers. Part W10545923 is the genuine OEM replacement drum assembly that restores full tumbling action and proper airflow immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dryer powers on and motor runs normally
- ✔ Heat is working correctly
- ✔ Drive belt and motor pulley confirmed intact
- ✔ ONLY problem is drum not rotating / no tumbling
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dryer runs but drum does not spin or tumble
- Clothes come out wet even after a full cycle
- Loud scraping, grinding, or squealing noise during operation
- Drum wobbles or feels loose when rotated by hand
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this drum assembly restores normal drying operation immediately.
📦 Part Details
- Part Number: W10545923
- Type: OEM Dryer Drum Assembly — full drum with front and rear bearing surfaces
- Replaces: 3978765, 8318215, 8528998, W10121168, W10181467, W10197999, W10545922
- Brands: Maytag, Whirlpool, Amana, Crosley
While the drum is out, inspect and replace the dryer drum belt and drum support rollers — these wear together and replacing them now prevents a second disassembly within months.
⚙️ Installation
Skill Level: MODERATE — 45–75 minutes. Disconnect power before servicing. Remove the front panel and bulkhead to access the drum. Disconnect the belt from the motor pulley, slide out the old drum, transfer any drum seals if required, and seat the new drum onto the rear bearing. Re-route the belt around the drum and motor pulley, reassemble the cabinet, and run a test cycle.
✓ Compatible Models
Confirmed compatible with MED6230HC0, MED7230HW0, MEDX700XW0, MEDC700VW0, MGD6230HC0, MDG17CSAGW0, MDE17CSAYW0 plus additional Maytag and Whirlpool models. Contact us to verify your model number before ordering.
💡 Pro Tip
The drum belt and drum support rollers are already accessible once the drum is removed. Replacing all three components together costs less than a second service call and adds years of reliable operation. Ask us about a drum kit bundle if you need all three parts.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
