Range Knob Not Turning? Burner Control Knob W11156487 – Fix Broken or Stripped Knob Fast
A broken, loose, or stripped burner control knob makes it impossible to safely control your range's heat output. In most Whirlpool and KitchenAid ranges, this is caused by a failed burner control knob. When it fails, the plastic interior cracks or strips from repeated turning — the knob spins freely, falls off, or won't grip the valve stem, leaving that burner unusable. ⚡ Common failure point in Whirlpool-built ranges after 8–12 years of daily use. Part W11156487 is the genuine OEM replacement that restores full burner control with an exact factory fit and finish.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ QUALIFIER 1 — your range powers on and other burners work normally
- ✔ QUALIFIER 2 — the gas valve stem is intact (not stripped or bent)
- ✔ QUALIFIER 3 — gas supply to the range is confirmed OK
- ✔ ONLY problem is a broken, loose, stripped, or missing burner control knob
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Knob spins freely without engaging the valve stem
- Knob falls off when touched or during use
- Knob is cracked, broken, or missing entirely
- Knob is difficult to turn or feels loose and wobbly
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this burner control knob restores normal operation immediately.
📦 Part Details
- Part Number: W11156487
- Type: Genuine OEM Stainless Steel Burner Control Knob
- Replaces: W10823529
- Brands: Whirlpool, KitchenAid
Inspect the gas valve stem while the knob is off. If the stem is stripped or bent, the new knob won't seat properly — replace the gas valve at the same time to avoid a repeat repair and a second service call.
⚙️ Installation
Skill Level: EASY — 2–5 minutes, no tools required. Disconnect power before servicing. Pull the old knob straight off the valve stem (friction-fit only). Align the D-shaped hole on the new knob with the flat side of the valve stem and push firmly until fully seated. Test by turning through the full range from Off to High before use. Sold individually — order one per burner position as needed.
✓ Compatible Models
Confirmed compatible with KFED500EBL, KFED500EBS, KFED500ESS, KFED500EWH, YKFED500EBS, YKFED500ESS plus additional Whirlpool and KitchenAid models. Contact us to verify your model number before ordering.
✓ Model-Specific Repair Pages
Don't see your model? Contact us and we'll confirm compatibility.
💡 Pro Tip
Pull the old knob off and inspect the D-shaped valve stem. If it's rounded, stripped, or bent, a new knob alone won't fix the problem — the stem won't hold. Replace the gas valve at the same time to complete the repair in one visit and avoid a callback.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
