Whirlpool Microwave hood combo Assembly, Control Panel (Stainless) W11386249

Stainless-steel microwave control-panel assembly for the user interface of Maytag microwave hood-combo models.

Is This the Right Part?

Common Symptoms

• Visible cosmetic damage to the stainless control-panel assembly.
• Loose, misaligned, or damaged control-panel front around the separately listed control-area components.
• A control-pad complaint may be present, but Control Lock, power interruption, the keypad, the user-interface PCBA, and the appliance control unit should be considered before attributing it to this panel assembly.

Check Before Replacing

• With power on, check the display for a Control Lock indication (such as LOC, L, or a lock icon) and unlock it according to the owner guidance before diagnosing a no-response complaint.
• If the microwave has experienced a control/display issue, power-cycle it by unplugging it or disconnecting power for at least 1 minute, then restore power and retest.
• If an F2E1 stuck-key failure is displayed, record the code and use the model-specific tech sheet; it identifies the likely failure as the keypad, so do not assume the stainless panel assembly alone is the cause.
• With power disconnected, visually inspect the panel front for physical damage or misalignment; do not enter microwave high-voltage compartments for this check.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool/Maytag repair-parts-list component: Assembly, Control Panel, Stainless.
• Stainless finish.
• Separately cataloged from the PCBA, control backer, and push-button assembly in the applicable repair parts list.
• Intended for the control-panel area of the supported microwave hood-combo family.

Installation Notes

• Disconnect power before servicing.
• Use the applicable model-specific service literature; this control-panel assembly is distinct from the separately listed UI PCBA, appliance control unit, backer, and push-button assembly.
• Reassemble all parts and panels before restoring power or operating the microwave.
• Because microwave servicing can involve high voltage, limit DIY work to accessible exterior/control-panel service described in the model documentation; use qualified service for internal electrical or high-voltage diagnosis.

Verified Compatible Models

MMV4207JB00, MMV4207JK00, MMV4207JW00, MMV4207JZ00, YMMV4207JB00, YMMV4207JK00, YMMV4207JW00, YMMV4207JZ00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.