Whirlpool Convection assembly, 3.2 kW / range convection fan motor W11414552, Replaces W10563084, W10874472, W11033855, W11093167, W11353932

Genuine OEM Whirlpool convection fan assembly/motor that circulates hot air through the oven for even heating. Encompass identifies the part as “Convection Asm, 3.2Kw.”

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Uneven baking or roasting during convection cooking
• Longer-than-normal convection cooking times
• Buzzing, grinding, rattling, or other abnormal noise from the convection fan area
• Convection fan blade is difficult to turn by hand with power disconnected

Check Before Replacing

• Confirm the appliance is set to a convection cooking mode and allow sufficient time for the fan to start; fan behavior may vary by cycle.
• Disconnect electrical power and allow the oven to cool completely before inspection.
• With power disconnected, visually check the fan area for foreign objects, damaged blades, or signs of rubbing.
• With power disconnected, carefully check whether the fan blade turns freely; resistance, scraping, or looseness can indicate a mechanical problem but does not by itself prove the assembly is defective.
• If electrical testing is required, have a qualified technician check the assembly and associated wiring according to the appliance service documentation.

Pro Tip

Part Details

Key Features

• Genuine OEM Whirlpool convection assembly
• Rated/listed as a 3.2 kW convection assembly
• Designed for range, stove, and oven convection systems
• Assembly drives airflow needed for more even oven heating
• Cataloged under Whirlpool manufacturer part number W11414552

Installation Notes

• Disconnect power at the plug or circuit breaker and allow the oven to cool completely before servicing.
• Verify W11414552 against the appliance model and serial information before installation.
• Follow the appliance-specific service documentation for access, wiring disconnection, fastener removal, and assembly orientation.
• Record connector placement and assembly orientation before removal so the replacement is reinstalled in the same configuration.
• After installation, restore power and test the convection function while checking for proper airflow and abnormal noise.

Verified Compatible Models

JDS1450CDP0, JDS1450DP0, JDS1450DS0, JDS1450FS0, JDS1450ML1, JDS1750ML1, JES1450CDB0, JES1450CDS0, JES1450CFB1, JES1450DS1, JES1450FS1, JES1450FS3, JES1450ML1, JES1750CEB0, JES1750FB1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.