Menu
Dishwasher Door Falling Open or Won’t Stay Closed? Door Spring WPW10337934 – Fix It Fast
A dishwasher door that drops open suddenly, won’t stay latched, or slams down when opened is almost always caused by a broken or stretched door spring. In most Whirlpool, Maytag, and Amana dishwashers, the door spring provides the counterbalance tension that controls how the door opens and holds position. When it breaks or loses tension, the door falls open under its own weight, creating a safety hazard and preventing the dishwasher from running. ⚡ One of the most common mechanical failures on Whirlpool-platform dishwashers. Part WPW10337934 is the genuine OEM replacement that restores proper door tension and smooth, controlled operation immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ The dishwasher powers on and the control panel works normally
- ✔ The door latch and handle are intact and undamaged
- ✔ Water supply and drain are confirmed OK
- ✔ ONLY problem is the door falling open, dropping suddenly, or lacking resistance when opening
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dishwasher door drops open suddenly when unlatched
- Door has no resistance — falls all the way down without control
- Door won’t stay open at a comfortable angle for loading
- Dishwasher won’t start because door isn’t holding the latch position
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this door spring restores smooth, controlled door operation immediately.
📦 Part Details
- Part Number: WPW10337934
- Type: Dishwasher Door Balance Spring / Tub Spring
- Replaces: W10337934, 8268989, 8524473, W10462694
- Brands: Whirlpool, Maytag, Amana, Inglis
⚠️ Recommended While Repairing:
Dishwasher door springs are installed in pairs — one on each side of the tub. If one has broken, the other has been under uneven stress and is likely close to failing. Replace both springs at the same time to restore balanced door tension and avoid a repeat repair within weeks.
Dishwasher door springs are installed in pairs — one on each side of the tub. If one has broken, the other has been under uneven stress and is likely close to failing. Replace both springs at the same time to restore balanced door tension and avoid a repeat repair within weeks.
⚙️ Installation
Skill Level: EASY — 15–25 minutes. Disconnect power before servicing. Open the dishwasher door and remove the lower access panel at the front of the unit to expose the spring and cable assembly on each side. Unhook the old spring from the anchor point and cable, hook the new spring in place, and reinstall the access panel. No special tools required.
✓ Compatible Models
Confirmed compatible with WDF530PAYW5, WDT710PAYW4, MDB6769PAS2, ADB1400PYS3, IUD8100YS2 plus hundreds of additional Whirlpool, Maytag, and Amana dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
Always Replace in Pairs:
Door springs work as a matched set — left and right. When one breaks, the surviving spring has been carrying uneven load and is already fatigued. Ordering a single spring and leaving the original in place is the most common reason for a repeat repair within 30–90 days. Order two and do the job once.
Door springs work as a matched set — left and right. When one breaks, the surviving spring has been carrying uneven load and is already fatigued. Ordering a single spring and leaving the original in place is the most common reason for a repeat repair within 30–90 days. Order two and do the job once.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
