Whirlpool Dryer thermal fuse (thermal limiter), 195°F WP3390719, Replaces 3390719, 279650, 3389639, 3389640, 660877, 688841, 690198, 690798, 80004, Fixes Dryer will not start or will not heat when the fuse has opened
Genuine Whirlpool OEM disposable thermal fuse mounted on the dryer exhaust duct. It opens when the dryer overheats and cannot be reset. In gas dryers it shuts off the burner; in electric dryers it shuts off the motor.
Genuine Whirlpool OEM disposable thermal fuse mounted on the dryer exhaust duct. It opens when the dryer overheats and cannot be reset. In gas dryers it shuts off the burner; in electric dryers it shuts off the motor.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Dryer does not start
- Dryer tumbles but does not heat
- Dryer shuts off or stops operating after overheating
- Dryer runs unusually hot or has restricted airflow associated with a blown fuse
Check Before Replacing
- Disconnect electrical power before servicing.
- With the fuse electrically isolated, check continuity across its terminals with a multimeter; an open circuit indicates the fuse has opened.
- Inspect and clear the lint screen, exhaust duct, vent hose, and exterior vent for airflow restrictions before installing a replacement.
- Do not bypass or permanently bridge the thermal fuse.
- Confirm the replacement fuse matches the appliance model and the original fuse rating.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM thermal fuse
- Disposable, non-resettable safety component
- Mounts on the dryer exhaust duct
- 195°F / approximately 91°C rating
- Used in gas dryers to interrupt burner operation and in electric dryers to interrupt motor operation during overheating
Installation Notes
- Disconnect the dryer from electrical power before installation.
- The fuse is mounted on the exhaust duct, although the access panel and exact disassembly sequence vary by dryer model.
- Transfer the wire terminals and mounting hardware to the new fuse only as applicable to the appliance’s model-specific design.
- After replacement, reassemble the dryer and verify that the venting system is clear; do not operate the dryer with the fuse bypassed.
Verified Compatible Models
1106007299, 10686294140, 10686294340, 10686294540, 10686294740, 10686294840, 10687884100, 10687884300, 10687884600, 10697502820, 11060052990, 11060052991, 11060056990, 11060056991, 11060072990
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
