Whirlpool Dishwasher door strike WP8580309, Replaces 8580309, 8269111

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Door does not stay latched
• Dishwasher indicates or behaves as though the door is open
• Door-switch actuation is unreliable
• Door strike is visibly bent, damaged, or misaligned
• Door does not achieve a proper seal when closed

Check Before Replacing

• With the dishwasher empty and power disconnected, visually inspect the strike for bending, cracks, looseness, or misalignment.
• Slowly close the door and verify that the strike enters the latch smoothly without requiring unusual force.
• Check whether the strike aligns with the latch opening and whether the door closes evenly against the tub.
• If the strike is intact and aligned, inspect the latch and door-switch area as separate possible causes; the strike alone does not confirm the diagnosis.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing the dishwasher.
• Open the dishwasher door and release the retaining tabs to remove the old strike if it is still intact.
• Insert the replacement strike into the frame in the same orientation and press it into place until it is seated.
• Close the door slowly and verify that the strike aligns with the latch and the door closes without excessive force.

Verified Compatible Models

665.13864K601, 665.15112K217, ADB1100AWB1, ADB1100AWB3, ADB1400AWQ5, ADB1600AWW0, CDB7000AWS1, DU1015XTXT1, GU2500XTPB7, GU3600XTSB0, IDF330PAGW0, IUD8000RQ7, KUDI01DLBT1, KUDP01ILBL6, WDF310PAAB2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.