WASHER FAILS TO COMPLETE A CYCLE OR OPERATES ERRATICALL
Whirlpool Washer Main control board WPW10192966, Replaces W10192966, Fixes Washer fails to complete a cycle or operates erratically after power, wiring, and connected-component checks are satisfactory
Electronic main control board for washers. It manages washer functions including filling, washing, draining, spinning, cycle operation, motor operation, and water levels.
Part WPW10192966Replaces W10192966Whirlpool
Electronic main control board for washers. It manages washer functions including filling, washing, draining, spinning, cycle operation, motor operation, and water levels.
Is This the Right Part?
Part NumberWPW10192966
ReplacesW10192966
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeMain control board
Common Symptoms
- Washer will not start
- Washer stops mid-cycle
- Washer does not drain or fill correctly
- Washer does not enter or complete high-speed spin
- Washer displays certain control-related fault codes, including F14 on applicable models
- Washer controls or indicator lights behave abnormally
Check Before Replacing
- Disconnect electrical power before inspecting the board, connectors, or wiring.
- Confirm the washer has proper incoming power and that the control-board and component harness connections are fully seated and free of visible damage.
- Run the washer’s applicable service or diagnostic cycle and note stored fault codes and whether the affected function operates during testing.
- Before condemning the control board, check related components and wiring for an open circuit, short, loose connection, or mechanical restriction; a control-board symptom can be caused by another failed component.
- Do not replace the board solely from a generic symptom; compare the observed fault with the model-specific technical documentation.
Pro Tip
If a washer performs a function during diagnostic testing but not during a normal cycle, verify the correct board, wiring, motor-control circuitry, and mechanical load conditions before replacing the main control board.
Part Details
Part NumberWPW10192966
Part TypeMain control board
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionElectronic main control board that coordinates the washer’s user-selected cycles and controls functions such as filling, washing, draining, spinning, motor operation, and water-level management.
Cross ReferencesW10192966
Key Features
- Whirlpool OEM central control unit assembly
- Controls multiple washer operating functions rather than a single load
- Part number WPW10192966
- Replaces Whirlpool part number W10192966
Installation Notes
- Disconnect electrical power before installation.
- Protect hands from sheet-metal edges and handle the electronic assembly carefully.
- Transfer and reconnect wiring exactly as found, ensuring each harness is fully seated and routed correctly.
- After installation, restore power and use the washer’s applicable diagnostic or functional test to verify operation.
Verified Compatible Models
MHWC7500YW0, WFC7500VW0, WFC7500VW1, WFC7500VW2
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
