Whirlpool Washer Hot water inlet valve WPW10212598, Replaces W10212598

Genuine Whirlpool OEM hot-water inlet valve that controls hot-water flow into compatible washers and washer/dryer laundry centers.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Slow or incomplete filling on hot-water selections
• No hot-water entry while cold-water filling may remain normal
• Water leaking from the valve or its connections
• Washer filling when it is not supposed to

Check Before Replacing

• Confirm the household hot-water supply valve is fully open and the hot inlet hose is connected to the washer’s hot inlet and is not kinked.
• With water supply turned off, inspect the hot-hose connection and valve inlet screen for visible blockage or damage; do not disassemble the valve.
• Observe whether water continues entering the washer when the appliance is not calling for water; shut off the household water supply if uncontrolled filling occurs.
• If electrical testing is appropriate for the specific washer model, disconnect appliance power and follow that model’s service documentation for inlet-valve coil checks; do not perform energized voltage testing unless qualified.
• Check for external leakage around the hose connection and valve body before replacing the component.

Pro Tip

Part Details

Key Features

• Whirlpool genuine OEM hot-water inlet valve
• Designed for compatible Whirlpool-family washers and washer/dryer laundry centers
• Replaces Whirlpool part number W10212598
• Single hot-water valve component; the matching cold-water valve is a separate part on applicable assemblies

Installation Notes

• Disconnect electrical power before servicing.
• Turn off the household hot- and cold-water supplies before removing inlet hoses.
• Prevent residual water from spilling when disconnecting the hose, and inspect the hose gasket and connection for proper seating during reassembly.
• Reconnect the valve’s wiring and hose connections exactly as found for the appliance model; verify that the hot hose is connected to the hot inlet.
• Restore water and power, then check the connection for leaks during a fill operation.

Verified Compatible Models

11041932510, 11041942710, 11041952710, CET8000AQ0, CET8000AQ1, CET8000XQ0, CET9000GQ0, CET9100GQ0, CGT8000AQ0, CGT8000AQ1, CGT8000XQ0, CGT9000GQ0, CGT9100GQ0, CHW8990AW0, CHW8990BW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.