Whirlpool Corporation Washer drain pump assembly WPW10465252, Replaces W10465252, W10192988

Genuine Whirlpool OEM drain pump assembly that removes wastewater from the washer during the drain portion of the cycle. It is used in compact/front-load washer applications.

Is This the Right Part?

Common Symptoms

• Water remains in the washer after the drain or spin portion of the cycle.
• Pump runs or hums but little or no water is discharged.
• Abnormal noise during draining may occur if debris reaches the pump impeller.
• Leakage near the pump area may occur if a hose connection or pump housing is damaged.

Check Before Replacing

• Unplug the washer before inspection or service.
• Check the drain hose for kinks, crushing, or visible obstruction before condemning the pump.
• Inspect accessible pump and hose connections for foreign objects or loose connections, following the washer's service information.
• During a drain or drain/spin cycle, listen for pump operation; a humming pump with retained water can indicate an obstruction or pump problem, but does not by itself confirm pump failure.
• If leakage is reported, inspect the pump housing and nearby hose connections for visible cracks, damage, or looseness.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM drain pump assembly.
• Designed for washer wastewater removal during the drain portion of the cycle.
• Compact/front-load washer application documented in the archived record.
• Whirlpool item number 2312350.
• Replaces manufacturer numbers W10465252 and W10192988.

Installation Notes

• Disconnect electrical power before installation and wear work gloves for hand protection.
• Verify the appliance model and part number before ordering or installing, because pump assemblies can have visually similar variations.
• Installation requires access to the washer's pump assembly and reconnection of the existing hose and electrical connections; follow the model-specific service instructions.
• After installation, run an appropriate drain or drain/spin test and check the pump area for leaks before returning the washer to normal use.

Verified Compatible Models

MHWC7500YW0, WFC7500VW0, WFC7500VW1, WFC7500VW2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.