The evaporator cover isn’t just a plastic panel — it’s the component that directs cold air from the evaporator coils evenly through the freezer and fresh food compartments. When it cracks, warps, or loses its seal, cold air bypasses the distribution path entirely: frost packs around the coils, warm spots develop in the fresh food section, and the compressor runs overtime trying to compensate. The WR01A02435 is the genuine OEM GE evaporator cover assembly that restores proper airflow and sealing — replacing 294D3163G001.
⚠️ Symptoms of a Failed Evaporator Cover
- Heavy frost or ice buildup on the back wall of the freezer
- Fresh food compartment warmer than set temperature
- Freezer section cooling unevenly — cold at back, warm at front
- Compressor running constantly without cycling off
- Visible crack, warp, or broken clip on the existing cover panel
- Loud fan noise from the freezer (fan hitting frost buildup)
✓ Part Details
- OEM Part Number: WR01A02435
- Replaces: 294D3163G001
- Type: Freezer evaporator cover assembly
- Function: Encloses evaporator coils and directs conditioned air through the freezer and fresh food compartments
- Application: GE, GE Profile, GE Cafe French door and bottom-freezer refrigerators
- OEM Manufacturer: GE Appliances
Before fitting the new cover, run a manual defrost cycle or use a hair dryer (on low) to fully clear all frost from the evaporator coils and surrounding cavity. Installing over residual ice will prevent the cover from seating flush, break the air seal immediately, and restart the frost cycle within days. Takes 20–30 minutes and is the single most important step for a lasting repair.
⚙️ Installation Notes
- Skill Level: Intermediate — freezer panel removal and clip work required
- Disconnect power before beginning and remove all freezer contents
- Fully defrost the evaporator cavity before installing the new cover (see Pro Tip)
- Inspect evaporator fan and defrost heater while the cover is off — replace if showing wear
- Ensure all mounting clips are fully engaged — a loose cover will vibrate and break the air seal
- Allow 24 hours after installation for temperatures to fully stabilize
✓ Compatible Models
Compatible with select GE, GE Profile, and GE Cafe refrigerator models including but not limited to: CWE19SP2NTS1, CWE19SP2NWS1, CWE19SP2TNS1, CWE19SP3NTD1, CWE19SP3NWD1, CWE19SP4NTW2, CWE19SP4NWW2, DFE24JYRCKFS, DFE24JYRDKFS, GDE25ESKTRSS, GDE25EYKERFS, GDE25EYKFRFS, GDE25EYKGRFS, GDE25EYKHRFS, GFE24JBLTFTS, GFE24JGKTFBB, GFE24JGKTFWW, GFE24JMKTFES, GFE24JSKTFSS, GFE24JYKEFFS, GNE25DYRCKFS, GNE25DYRLKFS, GNE25JGKTFBB, GNE25JGKTFWW, GNE25JMKTFES, GNE25JSKTFSS, GNE25JYKEFFS, GWE19JGLTFBB, GWE19JGLTFWW, GWE19JGLWFBB, GWE19JGLWFWW, GWE19JGLXFBB, GWE19JGLXFWW, GWE19JMLTFES, GWE19JMLWFES, GWE19JMLXFES, GWE19JSLTFSS, GWE19JYLEFFS, GWE19JYLFFFS, GWE19JYLGFFS, GYE18JBLTFTS, GYE18JEMTFDS, GYE18JMLTFES, GYE18JSLTFSS, GYE18JYLEFFS, PFE24HGLRKWW, PFE24HGLSKWW, PFE24HGLTKWW, PFE24HMLRKES, PFE24HMLSKES, PFE24HMLTKES, PFE24HYRLKFS, PNE25NGLRKBB, PNE25NGLRKWW, PNE25NGLSKBB, PNE25NGLSKWW, PNE25NGLTKBB, PNE25NGLTKWW, PNE25NMLRKES, PNE25NMLSKES, PNE25NMLTKES, PNE25NYRCKFS, PNE25NYRDKFS, PYE18HYRMKFS, XNE25JGKTFBB, XNE25JGKTFWW, XNE25JSKTFSS. Always verify your full model number before ordering.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
