GE Dryer; washer-dryer combo BELT DRIVE WW02F00854, Replaces 254C1413P002, WE03X29897, 500A155G181

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drum not rotating (motor runs but drum doesn't spin)
• Loud squealing or squeaking noise from dryer (belt slipping)
• Burning rubber smell (belt slipping and overheating)
• Visible belt damage (cracks, fraying, or broken belt)
• Intermittent drum rotation (belt slipping on and off)
• Complete dryer failure (broken belt prevents drum rotation)
• Clothes not drying properly (drum not rotating or rotating slowly)
• Excessive heat from dryer exterior (belt friction overheating)
• Drum rotates but slowly (worn belt losing grip)
• Belt visible through dryer opening (belt broken or misaligned)
• Dryer making grinding noise (belt rubbing or drum rubbing)
• Dryer stops mid-cycle (belt breaks during operation)

Check Before Replacing

• With power disconnected, inspect the belt for breaks, cracking, glazing, stretching, or missing sections.
• If the motor runs but the drum remains stationary, check whether the drum turns unusually freely by hand; other failures can produce the same symptom.
• Verify the complete appliance model number before ordering because similar belts may differ in size or fit.

Pro Tip

Part Details

Installation Notes

• CRITICAL SAFETY WARNING:
• This repair involves working inside the dryer with electrical components and high-temperature surfaces. Always unplug the dryer from the electrical outlet before beginning work to prevent electrical shock and accidental motor startup. If uncomfortable with this repair, hire a qualified technician.
• TOOLS REQUIRED:
• Phillips screwdriver, flathead screwdriver, nut driver or socket set (typically 1/4-inch or 5/16-inch), flashlight, work gloves, towels for cleaning, belt routing diagram (if available).
• IMPORTANT:
• This belt is 89-1/2 inches long with 4 ribs and 3 grooves. Verify your dryer model uses this belt length and rib configuration before ordering.
• Unplug the dryer
• from the electrical outlet to ensure complete power disconnection.
• CRITICAL:
• Never work on the dryer while it's plugged in.
• Remove all items
• from the dryer drum and lint trap.
• Move the dryer
• away from the wall to provide working space and access to the rear panel (if necessary).
• Allow the dryer to cool completely
• if it has been used recently. The drum and internal components reach high temperatures (up to 180°F) and require at least 30-60 minutes to cool to safe handling temperatures.
• Remove the lint trap
• and lint trap housing (if accessible from the front) to provide access to the drum area.
• Remove the front panel or access cover
• of the dryer. Most GE dryers have a removable front panel secured with screws or clips. Consult your dryer's manual for specific removal instructions.
• Take multiple photos
• of the belt routing, idler pulley position, motor pulley location, and drum assembly before disassembly.
• Belt routing must be exact for proper reassembly and dryer operation.
• Locate the idler pulley
• inside the dryer. The idler pulley is typically mounted on a spring-loaded arm that maintains belt tension. It's usually located near the drum, typically on the lower left or right side.
• Locate the motor pulley
• (typically 2-3 inches in diameter) on the motor shaft. The motor is usually located at the bottom or rear of the dryer.
• Locate the drum
• and identify the belt path around it. The belt wraps approximately 270-300 degrees around the drum, typically on the underside.
• Take detailed close-up photos
• of: belt routing around drum, idler pulley position and spring attachment, motor pulley position, belt path under idler pulley, and any belt guides or clips.
• Release the idler pulley tension
• by pushing the idler pulley arm inward or releasing the spring (varies by model). This removes tension from the belt, allowing it to be removed.
• Remove the old belt
• by carefully pulling it off the drum, idler pulley, and motor pulley.
• Caution:
• The belt may be hot or have sharp edges—handle carefully.
• Inspect the old belt
• for damage indicators: visible cracks or fraying (wear), hardened or brittle rubber (thermal degradation), thinned areas (wear from friction), broken ribs (mechanical damage), or discoloration (overheating). This confirms the diagnosis.
• Inspect the idler pulley
• for wear: the pulley should spin freely when rotated by hand. If it doesn't spin, is cracked, or has a flat spot, it should be replaced. A worn idler pulley causes rapid belt wear and slippage.
• Inspect the motor pulley
• for wear: the pulley grooves should be smooth and uniform. If grooves are worn, cracked, or have flat spots, the pulley should be replaced.
• Inspect the drum rollers or felt seal
• (if accessible) for wear or damage. Worn rollers cause the drum to rub on the housing, damaging the new belt.
• Clean the belt path
• inside the dryer, removing lint, debris, and dust. Use a flashlight to inspect for lint buildup around the drum and pulleys.
• Unpack the new WW02F00854 belt
• from its packaging.
• Compare the new belt to the old one
• to verify length (89-1/2 inches), rib configuration (4 ribs, 3 grooves), width, and overall design match.
• Inspect the new belt
• for any shipping damage before installation. The belt should be flexible with no cracks, fraying, or damage.
• Route the new belt
• around the drum, following your detailed photos exactly. The belt typically wraps under the drum, with approximately 270-300 degrees of contact.
• Position the belt under the idler pulley
• , ensuring it sits properly in the pulley grooves.
• Position the belt on the motor pulley
• Verify the belt is properly routed
• by checking against your detailed photos. The belt path should match the old belt exactly.
• (if it was held) to allow the spring-loaded arm to engage and tension the belt. The idler pulley should apply firm pressure to the belt.
• Verify proper belt tension
• by attempting to move the belt with your finger at the point of maximum span (typically on top of the drum). The belt should move approximately 1/2 inch with moderate finger pressure. If it moves more than 1 inch, tension is too loose. If it doesn't move at all, tension is too tight.
• Rotate the drum by hand
• to verify the belt drives smoothly without slipping. The drum should rotate freely with consistent resistance.
• Reinstall any belt guides or clips
• that were removed during disassembly.
• Reinstall the front panel or access cover
• by positioning it and securing with screws or clips.
• Reinstall the lint trap
• and lint trap housing.
• Restore electrical power
• by plugging in the dryer.
• Run a test cycle
• to verify proper belt operation:Set the dryer to air dry or low heat for 5-10 minutesListen for smooth, quiet operation—should not hear squealing, squeaking, or grindingFeel the dryer exterior for excessive heat or vibrationAfter 5 minutes, stop the dryer and check if the drum rotated (open door and verify drum position changed)
• Listen for any unusual sounds
• during the test cycle—squealing (belt slipping), squeaking (worn pulley), or grinding (drum rubbing) indicate problems.
• Check for proper drum rotation
• by stopping the dryer mid-cycle and manually rotating the drum. Should rotate smoothly with consistent resistance.
• Run a full drying cycle
• with a small load of damp towels to verify proper operation over an extended period.
• Monitor for proper performance
• during the full cycle: consistent drum rotation, no unusual sounds, no burning smell, and proper heat generation.
• If the dryer operates smoothly with quiet operation, consistent drum rotation, and proper drying performance
• , the repair is complete.
• Safety Notes:
• Always unplug the dryer before working inside. Allow adequate cooling time before beginning work. Handle the old belt carefully—may have sharp edges. Verify belt routing matches your detailed photos exactly. Check idler pulley and motor pulley for wear—may need replacement if damaged. Test operation thoroughly before considering the repair complete. This repair requires moderate mechanical skills and typically takes 45-75 minutes for DIY.

Verified Compatible Models

GCMX180ED5WW, GMMP280ED5WS, GMMP280ED6WS, GTD33EASK0WW, GTD33PASK0WW, GTD40EBMK0WW, GTD40GBMK0WW, GTD42EAAJ0WW, GTD42EAAJ1WW, GTD42EAAJ2WW, GTD42EAMJ0WW, GTD42EAMJ1WW, GTD42EAMJ2WW, GTD42EBAK0WS, GTD42GAMJ0WW, GTD42GAMJ1WW, GTD42GASJ2WW, GTD42GBMK0WW, GTD45EAMJ0WS, GTD45EAMJ1WS, GTD45EAMJ2WS, GTD45EBMK0WS, GTD45GAMJ0WS, GTD45GAMJ1WS, GTD45GAMJ2WS, GTD45GBMK0WS, GTD46EDMN0WS, GTD47EBAL0DG, GTD65EBMJ0WS, GTD65EBMJ1WS, GTD65EBMJ2WS, GTD65EBMJ3WS, GTD65EBMK0DG, GTD65EBMK0WS, GTD65EBMK1DG, GTD65EBMK1WS, GTD65GBMJ1WS, GTD65GBMK0WS, GTD75ECML0DG, GTD75ECML0WS, GTD75ECML1DG, GTD75GCML0DG, GTD75GCML0WS, GTDP180ED5WW, GTDX180ED5WW, GTDX180GD6WW, GTMP280ED4WW, GTMP280ED5WW, GTMP280ED6WW, GTMP280GD5WW, GTMP280GD6WW, GTMP520ED4WW, GTMP520ED5WW, GTMP520GD5WW, GTMX100ED5WW, GTMX180ED3WW, GTMX180ED4WW, GTMX180ED5WW, GTMX180ED6WW, GTMX180GD5WW, GTX18ESBJ0WW, GTX18ESMJ0WW, GTX18GSMJ0WW, GTX18GSMJ1WW, GTX18GSSJ1WW, GTX22EASK0WW, GTX22EBMK0WW, GTX22GASK0WW, GTX33GASK0WW, GTX42EASJ2WW, HTDX100GD6WW, HTDX100GM8WW, HTMX050EF4WW, HTX21EASK0WW, HTX21PASK0WW, HTX22EBMK0WW, HTX24GASK0WS, MKR62FWTWB00, MKR62FWTWB10, MKR62GWTWB00, MTMX050EF3WW, MTMX050EF4WW, MTMX050EF5WW, MTX22EBMK0WW, SEG26N5MNBAB00, SGE17R8XSBBH00, SGE17R8XSDCT00, SGE26N5XNBBT00, SGE26N5XNBBT10, SGE26N5XNBCT00, SGE47N5XSBBH00, SGE47N5XSBBH01, SGE47N5XSSBP00, SGE47N8XSBBT10, SGG47N5XNBAB00, SGN17R8XSBAB00, SGN27N5XSBAB00, SGN47N5XNBAB00, SGN47N5XSSAB00, SME17R8MSBBP00, SME17R8MSDBP00, SME17R8MSDCT00, SME17R8MSGBP00, SME17R8MSGCT00, SME17R8XSBBT00, SME17R8XSBBT10, SME17R8XSBCT00, SME17R8XSGBP00, SME17R8XSGBT00, SME17R8XSGBT10, SME17R8XSGCT00, SME26N5MNBBP00, SME26N5XNBBP00, SME26N5XNBBT00, SME26N5XNBBT10, SME26N5XNBCT00, SME27N5MSBBP00, SME47N5XSBBP00, SME47N5XSBBP01, SME47N5XSBBT00, SME47N5XSBBT10, SME47N8MSBBP00, SME47N8MSBBP01, SME47N8MSBCT00, SME47N8MSBCT10, SME47N8MSGBP00, SME47N8MSGBP01, SME47N8MSGCT00, SME47N8MSRBP00, SME47N8XSBBT00, SME47N8XSBBT10, SME47N8XSBCT00, SMG17R8MSBAB00, SMG17R8MSDAB00, SMG17R8MSGAB00, SMG26N5MNBAB00, SMG26N5MNBCL00, SMG27N5MSBAB00, SMG47N5MSBAB00, SMG47N8MSBAB00, STE26N5MNBBP00, STE26N5XNBBP00, XKR72FWTWB00, XKR72FWTWB10, C978-972220, C978-973220, C978-973221, CLME71214BAT00, CLME77014BFU00, CLME77014DFU00, CLMG77104DBB00, DE7027G1CA0, DE7027G1US0, DE7027J1CA0, DE7027J1CA1, DE7027J1US0, DE7027J1US1, DE7027P2CA0, DE7027P2US0, DG7027G1US0, DG7027J1US0, DG7027J1US1, DG7027P2US0, DMG17R8MSDAB00, ECL1540EEBBY00, ECL1540EEDGY00, GFD40ESMM0WW, GFD40GSCM0WW, GFD40GSMM0WW, GFD40GSMM1WW, GFD45ESMK0DG, GFD45ESMK0WW, GFD45ESMM0DG, GFD45ESMM0WW, GFD45ESMM1DG, GFD45ESMM1WW, GFD45GSMK0DG, GFD45GSMK0WW, GFD45GSMM0DG, GFD45GSMM0WW, GFDS170EH0WW, GFDS170GH0WW, GFDS175EH0DG, GFDS175GH0DG, GFMN110ED0WW, GFMN110ED1WW, GFMN110ED2WW, GFMN110GD0WW, GFMN110GD1WW, GFMN110GD2WW, GFMN120ED0WW, GFMN120ED2WW, GFMN240EL0WW, GFMN240GL0WW, GFMN240GL1WW, GFMN245EL0MS, GFMS140ED0WW, GFMS140ED1WW, GFMS145ED0MP, GFMS150ED0WW, GFMS150ED1WW, GFMS150GD0WW, GFMS150GD1WW, GFMS155ED0MP, GFMS155GD0MP, GFMS170EH0WW, GFMS170EH1WW, GFMS170GH0WW, GFMS170GH1WW, GFMS175EH0DG, GFMS175EH1DG, GFMS175GH0DG, GFMS175GH1DG, GFMS350GL0WW, GFMS355EL0MS, GFMS355EL0MV, GFMS355EL1MS, GFMS355EL1MV, GFMS355GL0MS, GMMN120ED0WW, GMMN120ED1WW, GTD32EBMP0WW, GTD72EBMN0DG, GTD72EBMN0WS, GTD72GBMN0WS, GTMS940EEWS00, GTMS940GEWS00, GTMS945EEGG00, GTMS945GEGG00, GTUN275EM0WW, GTUP270EM0WW, GTUP270EM1WW, GTUP270EM2WW, GTUP270EM3WW, GTUP270EM4WW, GTUP270GM4WW, GTUP270GM5WW, GTUP270GMWM0, GTUP270GMWM00, GTUP270GMWM01, GTUP270GMWM02, GTUP270PSDG00, GUAN275ED0WW, GUAN275ED1WW, GUAN275ED2WW, GUAP270EM0WW, GUAP270EM1WW, GUAP270EM2WW, GUAP270EM3WW, GUAP270EM4WW, GUD27EEMN0WW, GUD27ESMJ0WW, GUD27ESMJ1WW, GUD27ESMM0WW, GUD27ESMM1WW, GUD27ESPM0DG, GUD27ESPM1DG, GUD27ESSJ1WW, GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSPM0DG, GUD27GSPM1DG, GUD27GSSJ0WW, GUD27GSSJ1WW, GUD27GSSM0WW, GUD27GSSM1WW, GUD27GSSM2WW, GUD37EEMN0DG, GUD37ESMJ0DG, GUD37ESMJ1DG, GUD37ESMM1DG, GUV27ESSM1WW, ICL1740PSDG00, ICL1740PSDG01, ICL1740PSDG10, LCMP77104BAB00, LCMP77104BAB01, MCL1540EEBBX01, MCL1540EEBBX02, MCL1540EEBBX03, MCL1540EEBBX04, MCL1540EEBBY00, MCL1540EEBBY01, MCL1540EEBBY02, MCL1540EEBBY03, MCL1540EEBBY10, MCL1540EEDGX00, MCL1540EEDGX01, MCL1540EEDGX02, MCL1540EEDGX03, MCL1540EEDGY00, MCL1540EEDGY01, MCL1540EEDGY02, MCL1540EEDGY10, MCL1640PWBB00, MCL1640PWBB01, MCL1640PWBB10, MCL1740ESBB0, MCL1740ESBB01, MCL1740ESBB02, MCL1740ESBB03, MCL1740ESBB10, MCL1740ESDG00, MCL1740ESDG01, MCL1740ESDG10, MCL1740ESGG0, MCL1740ESGG01, MCL1740ESGG02, MCL1740GSBB0, MCL1740GSBB02, MCL1740GSBB03, MCL1740GSBB10, MCL1740PSBB0, MCL1740PSBB01, MCL1740PSBB02, MCL1740PSBB03, MCL1740PSBB10, MCL1740PSDG00, MCL1740PSDG01, MCL1740PSDG10, MCL1740PSGG0, MCL1740PSGG00, MCL1740PSGG01, MCL1740PSGG02, MCL2040PPDG00, MCL6840ESBB0, MCL6840ESBB1, MCL6840GSBB0, MCL6840PSBB0, MCL6840PSBB1, MCLC1740GSBB00, MCLC1740GSBB01, MCLC1740GSBB10, MCLC1740PSDG00, MCLC1740PSDG01, MCLC1740PSDG10, MKRN13FWAWB2, MKRN13GWAWB20, MKRN13GWAWB3, MKRN15FWAWB2, MKRN15GWAWB2, MKRR13FWAWB2, MKRR13GWAWB20, MKRR13GWAWB3, MKTG15DNAVB00, MKTG15DNAVB02, MKTG15DNAWB00, MKTG15DNAWB01, MKTG15DNAWB10, MKTG15DNAWB11, MKTG15DNAWB12, MKTG15DNAWB13, MKTG15GNAVB00, MKTG15GNAVB01, MKTG15GNAVB02, MKTG15GNAWB00, MKTG15GNAWB01, MKTG15GNAWB02, MKTG15GNAWB10, PTMN930EMWS0, PTMN940EMWS0, PTMN940GMWS0, PTMN945EMGG0, PTMP920EMWS0, PTMX910EM1WW, PTMX910EMWW0, SCC620DGBB00, SEC620DPBB00, SEC620DPBB01, SEC620WDPBB00, SGC620DEBB00, SGC620DPBB00, SGC630NDEBB00, SGC630NDPBB00, SGE1222EMSBB0, SGE1222EMSBB01, SGE1222PMSBB01, SGE1224ESWW0, SGE1225JMSBB01, SGE1321EMSBB0, SGE1520EMBYU0, SGE47N8XSBBT20, SGL1322EMSBB0, SGL1442EMSBB0, SGW715NDEWW00, SGW715NDEWW01, SGW715NDGWW00, SGW715NDGWW01, SGW819SDECG00, SGW819SDECG01, SGW819SDECW00, SGW819SDECW01, SGW819SDGCG00, SGW819SDGCG01, SGW819SDGCW00, SGW819SDGCW01, SIG47N5MSBAB00, SMA1940PGG01, SMC620DEWW00, SMC620DPBB01, SME17R8MSDBP01, SME17R8XSBBT20, SME47N8XSBBT20, SMG17R8MSDBB00, SMG47N8MSBBB00, SMG47N8MSGBB00, SMV745WXPBB00, SMV749NXPBB00, SMV749NXPGG00, SMV749NXPRR00, SMW715NDEBB00, SMW715NDEBB01, SMW715NDGBB00, SMW715NDGBB01, SMW715NDGWW00, SMW715NDGWW01, SMW817SXEBB00, SMW817SXEBB01, SMW817SXGBB00, SMW817SXGBB01, SMW819SDECG00, SMW819SDECG10, SMW819SDECG11, SMW819SDECW00, SMW819SDECW10, SMW819SDECW11, SMW819SDGCG00, SMW819SDGCG10, SMW819SDGCG11, SMW819SDGCW10, SMW819SDGCW11, STC620DEWW00, XUD27ESSM1WW, XUD27GSSM1WW, GFDN240EL0WW, GFDS355EL0MS, CLGG70214BAB00, CLGG70214DAB00, CLME77014BFU01, CLME77014BFU40, CLME77014DFU01, CLME77014DFU30, CLME77014DFU40, CLMG70204BBB00, CLMG70204DBB00, CLTG70214BAB00, DME17R8MSDBP10, DME17R8MSDBT00, DME47N8MSDBP00, DMG17R8MSDAB20, DRG17R8MSDAB00, FLC105WM20, GCL2340ESDG00, GCL2340ESDG01, GCL2340PSDG00, GDR726WG0, GFD40ESCM1WW, GFDN160EJ0WW, GTD40EBMR0WS, GTD40GBMR0WS, GTD65EBMK2WS, GTD65EBMR0DG, GTD65EBMR0WS, GTD65GBMK1WS, GTDP490ED7WS, GTX22EBMR0WW, GUV27ESMW0WW, ICL2040PSDG00, KDR626WM0, KLC076WM0, MCL1740GSBB01, MCL2040EEBBY00, MCL2040EEDGY00, MCL2040EPDG00, MCL2040ESBB00, MCL2040ESDG00, MCL2040GSBB00, MCL2040PPDG10, MCL2040PSBB00, MCL2040PSDG00, MCL2340ESDG00, MCL2440EPDG00, MCL2440ESBB00, MCL2440ESDG00, MCL2440PPDG00, MCL2440PSDG00, MCL2440PSDG01, MCLC2040GSBB00, MCLC2040PPDG00, MCLC2040PSDG00, MCLC2340GSDG00, MCLP2440PPDG00, MCLP2440PSBB00, MCLP2440PSDG00, MKTG15GNAWB20, MTX22EBMR0WW, RCL2040PPDG00, SGN47N5MSSAB00, SGN47N8MSSAB00, SME17R8MSBBP01, SME17R8MSBBT00, SME17R8MSDBT00, SME17R8MSDCT01, SME26N5MNBBP01, SME26N5XNBBP01, SME27N5MSBBT00, SME47N8MSBBP02, SME47N8MSBCT11, SME47N8MSDBP00, SMG17R8MSBAB01, SMG17R8MSDBB01, SMG26N5MNBAB01, SMG26N5MNBCL11, SMG47N8MSBAB01, SMG47N8MSBBB01, SMG47N8MSDAB00, SMG47N8MSGBB01, XKR72GWTWB00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.