GE LMA70213CBAB00 Washer Not Spinning: Safe Checks and Verified Parts

Direct answer: If your GE LMA70213CBAB00 Washer fills or agitates but is not spinning, begin with safe checks for the lid, load balance, drainage, and selected cycle. If those checks do not explain the symptom, more than one motor-and-drive component may be involved. The verified model hub for this washer lists three fitment options: Drive Belt WG04L05385, BELT DRIVE (POLYV BELT 6:1) WW01F01756, and Washer Motor Clutch WW01F01784. Confirm the model label and part number before buying or replacing anything.

What should you check first when the GE LMA70213CBAB00 washer will not spin?

Start by describing exactly where the cycle stops. “Not spinning” can mean different things:

• The washer does not begin the spin portion of the cycle.
• The washer fills and agitates but never reaches spin.
• The washer drains but the basket does not move.
• The basket moves weakly or stops, leaving clothes soaking wet.
• The washer makes a humming, clicking, grinding, or squealing noise instead of spinning.

These symptoms do not identify one part by themselves. A lid-related condition, an unbalanced load, incomplete drainage, or a drive component can produce a similar result. Note whether the washer shows flashing lights, an error indication, or any message. Also note whether the problem began suddenly or developed progressively.

Could the lid, load, or selected cycle prevent spinning?

Before inspecting parts, unplug the washer if you need to reach near moving components, and keep hands, clothing, and tools away from the basket and drive area. Check that the lid is fully closed and that the washer indicates the lid is secured when applicable. Do not bypass a lid safety feature.

Next, consider the load. A severely unbalanced or overloaded load may keep the washer from completing a normal spin. Redistribute the clothing and try an appropriate cycle. If the washer is empty or lightly loaded and still will not spin, the load is less likely to be the entire explanation, but it does not establish a failed part.

Record which cycle was selected. A washer that spins on a Drain & Spin cycle but not during another program may be showing a cycle-stage or load-related symptom rather than the same condition as a washer that never spins.

Does the washer drain completely before it should spin?

Check whether water remains in the tub at the point where spinning should begin. A washer that does not drain completely may not proceed as expected. Avoid reaching into standing water or moving internal components while the appliance is connected to power.

If the washer drains but the basket remains still, the symptom points toward a different troubleshooting path than a washer that stops with water inside. If it drains, agitates, or makes an unusual sound, write down those details. They help distinguish a drive-related possibility from a problem occurring earlier in the cycle, but they do not prove which component needs replacement.

Which verified parts fit the GE LMA70213CBAB00 washer?

The model-specific hub for the GE LMA70213CBAB00 Washer lists the following verified products for this not-spinning issue:

• Drive Belt WG04L05385 — a verified model-hub fitment in the Motor & Drive category.
• BELT DRIVE (POLYV BELT 6:1) WW01F01756 — a verified model-hub fitment in the Motor & Drive category.
• Washer Motor Clutch WW01F01784 — a verified model-hub fitment in the Motor & Drive category.

These are the exact verified options supplied for this model and symptom. They should not be treated as interchangeable simply because two listings relate to a belt or drive system. Check the part name, part number, and the part installed in your washer before ordering. If the old part has a readable number, compare it carefully. If the number cannot be confirmed, use the appliance label and model-specific hub information rather than guessing from appearance alone.

Could more than one component cause a washer that is not spinning?

Yes. A no-spin symptom can involve more than one area, and the visible symptom does not automatically identify the failed component. For this GE washer, the verified model options include two belt listings—WG04L05385 and WW01F01756—as well as the WW01F01784 Washer Motor Clutch. A belt-related symptom and a motor-clutch-related symptom may look similar from the outside: the washer may fill, agitate, drain, or make a noise while the basket fails to spin.

Do not replace multiple parts only because the washer will not spin. First document the cycle behavior, lid status, drainage, load condition, basket movement, and noise. Then inspect only as safely allowed by the manufacturer’s service instructions. A belt that is visibly damaged is a different finding from a basket that does not move despite an intact belt, but either observation should be matched to the correct part number and repair procedure.

How should you confirm the correct part before ordering?

Locate the appliance identification label and confirm the full model number: GE LMA70213CBAB00. Model labels can be easy to misread, so check every character, including the final suffix. Then confirm the part number against the product listing:

• WG04L05385 — Drive Belt
• WW01F01756 — BELT DRIVE (POLYV BELT 6:1)
• WW01F01784 — Washer Motor Clutch

Do not rely on a general search result, a similar-looking washer, or a part number from a different model. Confirm both the model label and the exact part number before purchasing. If you are not comfortable working around the washer’s drive system, use a qualified appliance professional.

Where can you find the verified GE LMA70213CBAB00 parts hub?

Use the GE LMA70213CBAB00 Washer parts hub to review the model-specific fitment options together. The hub is the appropriate starting point for comparing the verified WG04L05385 Drive Belt, WW01F01756 BELT DRIVE (POLYV BELT 6:1), and WW01F01784 Washer Motor Clutch. Selecting a part from the verified list does not guarantee that it is the cause of the symptom or that a repair will resolve every no-spin condition; diagnosis still depends on the washer’s actual behavior and safe inspection.

Frequently asked questions about a GE LMA70213CBAB00 washer not spinning

Does filling normally prove the washer only needs a belt?

No. Filling normally does not identify a specific failed component. Check agitation, drainage, lid status, basket movement, noises, and the selected cycle before choosing among verified parts.

Should I order both verified belt listings?

Not automatically. WG04L05385 and WW01F01756 are separate verified listings. Confirm the model label, the exact part number, and the part required for your washer before ordering.

What if the washer drains but leaves clothes wet?

Record whether the basket moves at all and whether the load was balanced. A draining washer that does not spin can still involve more than one possible component, including the verified belts or WW01F01784 Washer Motor Clutch.

Can I bypass the lid safety feature to test the washer?

No. Do not bypass or defeat a safety feature. Use safe, manufacturer-approved checks or contact a qualified appliance professional.