Samsung Washer Water Inlet Valve, 4-Coil DC62-00214M

Genuine Samsung washer water inlet valve that controls water flow into the washer. Documented as a 4-coil valve; Encompass specifies AC110-127V, bracket-mounted, with 1 inlet and 4 outlets.

Is This the Right Part?

Common Symptoms

• Washer does not fill or fills slowly.
• Washer stops during a cycle because the expected water level is not reached.
• Water continues entering when the washer should not be filling.
• Water leaks from the valve or its hose connections.
• Detergent, bleach, or fabric-softener dispenser does not receive water through the affected outlet.
• Washer may display a water-supply or fill-related error when insufficient flow is detected.

Check Before Replacing

• Confirm the household water supply valves are fully open and inspect the supply hoses for kinks.
• Unplug the washer and shut off the water supply before inspecting the valve inlet screens for sediment or debris.
• Check whether the inlet screens are obstructed; clean only accessible debris without damaging the screens.
• Inspect the valve body, hose connections, and nearby tubing for visible cracking or leakage.
• If appropriate for the specific washer service documentation, use the washer’s built-in water-valve test or a qualified technician’s electrical test; do not assume the valve is defective until water supply, hose, screen, wiring, and control-related causes have been considered.

Pro Tip

Part Details

Key Features

• Genuine Samsung washer water inlet valve.
• Four-coil configuration.
• AC 110-127 V specification documented by Encompass.
• Bracket-mounted design.
• One inlet and four outlets documented by Encompass.
• Controls water flow to the washer and its dispensing circuits.

Installation Notes

• Disconnect electrical power and shut off the applicable water supply valves before service.
• Expect residual water when supply hoses are disconnected; use suitable towels or a container to control spillage.
• Record or photograph hose and wire positions before removal so each connection can be returned to its original location.
• Transfer hoses and electrical connectors only to the corresponding ports and terminals on the replacement valve.
• Secure the valve and hose connections as specified by the washer’s service documentation, then check for leaks after restoring water and power.

Verified Compatible Models

592-49396, 592-49496, WF42H5400AF, WF42H5400AF/A2, WF42H5400AW, WF42H5400AW/A2, WF42H5400AW/A2-00, WF42H5600AP, WF42H5600AP/A2, WF42H5600AP/A2-00, WF42H5600AW, WF42H5600AW/A2, WF42H5700AG, WF45H6300AG, WF45H6300AG/A2, WF45H6300AW, WF45H6300AW/A2, WF45K6500AV, WF45K6500AV/A2, WF45K6500AW/A2, WF50K7500AV/A2, WF50K7500AV/A2-00, WF405ATPASU, WF405ATPASU/A2-00, WF405ATPASUAA, WF405ATPAWR, WF405ATPAWR/A2, WF405ATPAWR/A2-00, WF405ATPAWR/AA, WF405ATPAWR/AA-0001, WF435ATGJRA, WF435ATGJRA/A2, WF435ATGJRAA1, WF435ATGJWR, WF435ATGJWRA1, WF455ARGSGR, WF455ARGSGR/AA, WF455ARGSWR, WF455ARGSWR/A2, WF455ARGSWRAA, WF457ARGSG, WF457ARGSGR, WF457ARGSGR/AA-0001, WF457ARGSGRAA, WF457ARGSWR, WF457ARGSWR/AA, WF457ARGSWR/AA-0001

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.