Cooktop Burner Knob Broken or Missing? Control Knob W11418244 – Fix Surface Element Control Fast
If your Whirlpool electric cooktop has a cracked, broken, or missing burner control knob, you've lost the ability to safely set or adjust your surface element. In most Whirlpool electric cooktops, the control knob presses directly onto the burner-control switch shaft — when it cracks, strips, or breaks off, the element becomes difficult or impossible to control accurately. When it fails, you risk being unable to turn the burner on or off reliably, creating both a cooking and safety hazard. ⚡ Common wear-and-tear failure point in Whirlpool electric cooktops. Part W11418244 is the genuine OEM Whirlpool replacement knob that restores precise burner control and a factory-correct stainless-look finish.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your cooktop powers on and the surface element heats when the shaft is turned manually
- ✔ The burner-control switch itself is intact — only the knob is damaged or missing
- ✔ Your model number is confirmed in the compatible model list below
- ✔ ONLY problem is a broken, cracked, or missing control knob — not a faulty switch or element
Important: Confirm your complete model number suffix and verify the original knob's shaft orientation before ordering. W11418244 is for select Whirlpool electric cooktops — do not use on gas range burner knobs.
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Knob spins freely without engaging the switch shaft
- Knob is cracked, chipped, or has broken off entirely
- Burner setting is difficult to read or control accurately
- Knob feels loose or wobbles on the switch shaft
✔ If these symptoms match, a worn or broken control knob is the most likely cause.
✔ In most cases, pressing the new W11418244 knob onto the switch shaft restores full burner control immediately.
📦 Part Details
- Part Number: W11418244
- Type: Surface Element Control Knob — stainless-look finish, press-on shaft mount
- Replaces: W11130627, W11222054
- Supersession Chain: W11130627 / W11222054 → W11418244
- Brand: Whirlpool (OEM)
- Application: Select Whirlpool electric cooktops only — not for gas ranges
If the knob stripped or broke due to a stiff switch shaft, inspect the burner-control switch for wear at the same time. A damaged switch shaft can cause premature knob failure — replacing both together avoids a repeat service call.
⚙️ Installation
Skill Level: EASY — 5 minutes. Disconnect power before servicing. Pull the old knob straight off the switch shaft (no tools required in most cases). Align the new W11418244 knob with the shaft flat or D-profile and press firmly until fully seated. Restore power and verify the element responds correctly at each setting.
✓ Compatible Models
Confirmed compatible with WCE55US0HB00, WCE55US0HB01, WCE55US0HS00, WCE55US0HS01, WCE55US0HW00, WCE55US0HW01, WCE77US0HB00, WCE77US0HB01, WCE77US0HS00, WCE77US0HS01, WCE77US0HW00, WCE77US0HW01, WCE77US6HB00, WCE77US6HS00 and additional Whirlpool electric cooktop models. Contact us to verify your model number before ordering.
💡 Pro Tip
If one knob has cracked or stripped, the others on the same cooktop have experienced the same heat cycles and wear. Replacing all surface element control knobs at the same time ensures a consistent look and prevents the remaining knobs from failing one by one — saving a second service visit.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
