Samsung Range Display Blank, Flickering or Unresponsive? Display Board DE96-01027A – Fix Screen Failure Fast

A failed display board is the most common reason a Samsung NE58F series range shows a blank screen, flickering display, or completely unresponsive controls. In Samsung slide-in and freestanding electric ranges, the display board module is the electronic interface between the main control board and the user-facing LCD — it drives everything you see and touch. When it fails, the screen goes dark, shows garbled readouts, or the touchpad stops responding entirely, making the range impossible to operate. ⚡ Common failure point in Samsung NE58F and NE58K series electric ranges. Part DE96-01027A is the genuine OEM replacement that restores full display visibility and control panel function immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and oven heats normally
• ✔ Main control board confirmed OK — no control board error codes
• ✔ Power to the range confirmed at the breaker
• ✔ Ribbon cable connections between display and control board confirmed intact
• ✔ ONLY problem is a blank, flickering, partial, garbled, or unresponsive display

Not sure? Send us your model number — we'll confirm before you order. Fitment is revision-specific — verify the full model suffix (e.g. /AA-00) before ordering.

🔧 Common Symptoms

• Display screen completely blank or dark when range is powered on
• Flickering or intermittent display — works sometimes, fails randomly
• Partial display with missing digits, segments, or backlight
• Garbled or incorrect information shown on screen
• Touchpad or control buttons unresponsive despite range powering on
• Cannot set time, temperature, or cooking modes
• Error codes displayed continuously on screen

✔ If these symptoms match, the display board is the most likely failed component in the system.

✔ In most cases, replacing this display board restores full screen and control panel function immediately.

📦 Part Details

• Part Number: DE96-01027A
• Type: Range Display Board Control Module — receives control-board signals and displays time, temperature, and operating information; includes LCD and touchpad interface
• Replaces: DE96-01027A (current OEM — no verified Samsung OEM supersession numbers on file)
• Brands: Samsung

⚙️ Installation

Skill Level: MODERATE TO ADVANCED — 45–60 minutes. Disconnect power at the circuit breaker before beginning — display boards carry live voltage and are sensitive to static discharge. Remove the control panel cover (screws typically on top or sides of the panel). Photograph all ribbon cable and wire harness connections before disconnecting. Remove the mounting screws, swap the display board, reconnect all cables exactly as photographed, and reassemble. Restore power and test all display functions and control inputs before closing up.

✓ Compatible Models

Confirmed compatible with NE58F9500SS/AA-00, NE58F9500SS/AA-01, NE58F9500SS/AA-02, NE58F9710WS/AA-00, NE58F9710WS/AA-01, NE58F9710WS/AA-02, NE58F9710WS/AC-00, NE58F9710WS/AC-01, NE58F9710WS/AC-02, NE58K9500SG/AA-00. Contact us to verify your model number and revision suffix before ordering.

💡 Pro Tip

NE58F9500SS/AA-00, NE58F9500SS/AA-01, NE58F9500SS/AA-02, NE58F9710WS/AA-00, NE58F9710WS/AA-01, NE58F9710WS/AA-02, NE58F9710WS/AC-00, NE58F9710WS/AC-01, NE58F9710WS/AC-02, NE58K9500SG/AA-00

✓ Model-Specific Repair Pages