Electrolux / Frigidaire White dryer timer knob 131873304, Replaces 131873301, 131652401, 131167804, 131167801, Fixes Timer knob spins without changing the selected cycle or time
Genuine OEM white timer/control knob for dryer cycle selection; approximately 2.5 inches in diameter and designed for a D-shaped timer shaft.
Genuine OEM white timer/control knob for dryer cycle selection; approximately 2.5 inches in diameter and designed for a D-shaped timer shaft.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Knob is cracked, broken, or missing.
- Knob spins freely while the timer shaft remains stationary.
- Knob no longer stays attached to the shaft.
- Difficulty selecting or changing dryer settings.
- Dryer may not start when the knob cannot rotate the timer shaft to the required position.
Check Before Replacing
- Disconnect the dryer from electrical power before inspection.
- Visually inspect the knob for cracks, breaks, or deformation.
- Pull the knob straight off and inspect its internal D-shaped shaft receptacle for rounding, cracking, or missing material.
- With the knob removed, visually check that the exposed timer shaft has an intact D-shaped profile.
- Reinstall the knob temporarily and confirm that it seats firmly and turns the timer shaft without slipping; do not force it if the shaft or knob binds.
Pro Tip
Part Details
Key Features
- Genuine OEM Frigidaire/Electrolux dryer timer-control knob.
- White finish.
- Approximately 2.5 inches in diameter.
- Designed for a D-shaped timer shaft.
- Controls cycle and time selection by rotating the timer shaft.
- Direct-fit replacement knob that pulls off and presses onto the shaft.
Installation Notes
- Disconnect electrical power before servicing.
- Remove the old knob by pulling it straight off the timer post, as documented by Frigidaire Appliance Parts.
- Align the replacement knob's internal D-shaped opening with the timer shaft and press it straight on until fully seated.
- After installation, verify that the knob is secure and rotates the shaft without excessive force.
- Do not assume a knob replacement will correct a defective timer mechanism; if the shaft does not rotate or the dryer still malfunctions, further diagnosis is required.
Verified Compatible Models
CLCE500FW0, CLCE500FW1, CLCE500FW2, CLCE500FW4, CLCG500FW0, CLCG500FW1, CLCG500FW3, CLCG500FW5, FEX831CS0, FEX831FS0, FEX831FS1, FEX831FS2, FEX831FS4, FEZ831AS0, FEZ831AS1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
