Whirlpool Corporation Range Hinge-Door W10782125, Replaces W10774095

OEM left oven-door hinge for select Jenn-Air, KitchenAid, and Whirlpool ranges.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Door movement is uneven, binds, or feels abnormal at the left side.
• Door appears misaligned or does not sit flush with the oven frame.
• Door does not close properly after removal/reinstallation because a hinge latch is not fully returned to its locked position.

Check Before Replacing

• With the oven off and completely cool, slowly open and close the door while observing whether the left side moves, seats, and aligns consistently with the right side.
• With the door fully open, visually inspect the left hinge and its latch for obvious bending, damage, displacement, or a latch position that differs from the other hinge.
• Check that the door is not being blocked by an item, gasket issue, or interference at the door latch area before attributing a closing problem to the hinge.
• If the door was previously removed, verify both hinge latches are fully returned to the locked position and confirm the door opens and closes freely; do not force a hinge or door.

Pro Tip

Part Details

Key Features

• OEM Whirlpool/JennAir range oven-door hinge.
• Left-side door hinge application.
• Works as part of the oven-door pivot and seating mechanism.

Installation Notes

• Allow the oven and door to cool completely before handling the door.
• The compatible JennAir range literature states that oven-door removal is not suggested for normal use; when removal is necessary, use two or more people because the door is heavy.
• Prepare a flat, protected surface, such as one covered with a soft blanket, before removing the door.
• Handle the door from both sides rather than by its handle. After reinstallation, return both hinge latches to the locked position and verify that the door opens, closes, and clears the door latch correctly.
• Follow the model-specific service literature for actual hinge replacement; do not force the hinge mechanism.

Verified Compatible Models

JDRP430WP01, JDRP430WP02, JDRP548WP02, JDRP548WP03, JGRP430WP02, JGRP548WP02, JLRP430WP00, JLRP430WP01, JLRP548WP00, JLRP548WP01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.