Whirlpool Dishwasher Inner Door Panel W10908291, Replaces W10712597

Genuine Whirlpool OEM inner door panel for a dishwasher. It forms the interior section of the door, attaches to the outer door panel, and houses the detergent and rinse-aid dispensers. The part is listed as an oversized component and may be used across select Whirlpool-family dishwasher brands.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible cracking, bending, warping, or corrosion of the inner door panel
• Moisture or water appearing between the inner and outer door panels
• Water escaping around the dishwasher door during operation
• Detergent or rinse-aid dispenser mounting area is loose or damaged
• Door does not align or seal normally after inner-door damage

Check Before Replacing

• With the dishwasher empty and the door open, visually inspect the inner panel for cracks, distortion, corrosion, or damaged dispenser mounting areas.
• Check whether the inner panel sits evenly against the outer door panel and whether the door closes and aligns normally.
• Inspect the door gasket and adjacent door edges for displacement or damage before attributing a leak to the inner panel.
• Look for moisture between the inner and outer door panels after the appliance has been disconnected and allowed to cool; do not operate the dishwasher with exposed or damaged wiring.
• Confirm the replacement by matching the appliance model and comparing the panel shape, dispenser openings, and mounting-hole pattern.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM dishwasher inner door panel
• Stainless inner-door construction
• Mounting locations for detergent and rinse-aid dispensers
• Used on select Whirlpool-family dishwashers and related brands
• Listed as an oversized component by appliance-parts retailers
• Replaces Whirlpool previous number W10712597

Installation Notes

• Disconnect electrical power before beginning service and turn off the dishwasher water supply.
• Wear cut-resistant or otherwise suitable work gloves when handling the large metal panel.
• Remove and transfer only the components that are actually mounted to the inner door, such as the dispenser or related door hardware, following the model-specific service instructions.
• Support the door panel during removal and installation because the replacement is a large, oversized component.
• After installation, confirm that the door closes evenly, the dispenser openings are unobstructed, and the inner panel does not interfere with the gasket or latch.
• Run a cautious leak check only after all door components and wiring are properly reinstalled.

Verified Compatible Models

2214523N611, 66512762K314, 66514749N513, 66514759N511, KDTE104EWH2, KDTE204ESS1, KDTE234GBL0, KDTE304GPS1, MDB5969SDM2, MDB8959SFH4, MDB8969SDH3, WDF560SAFT2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.