Whirlpool Range Blower Wheel WPY707985, Replaces Y707985, 7114P005-60, 7-7985, 5-70058, 707985, 570058, 4381702

Genuine Whirlpool OEM downdraft exhaust blower wheel used to draw smoke, steam, and cooking odors through the downdraft ventilation/exhaust system. It is used on documented ranges and cooktops.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Downdraft fan moves little or no air even though the motor runs
• Rattling, scraping, or excessive vibration during downdraft operation
• Visible blower-wheel damage, cracking, or heavy grease buildup
• Ventilation performance decreases because the wheel is obstructed or not rotating correctly

Check Before Replacing

• Disconnect electrical power before inspection.
• With power disconnected, inspect the blower wheel for visible damage, obstruction, heavy grease buildup, or contact with the housing.
• If accessible under the appliance's service procedure, check that the wheel is seated on the motor shaft and can rotate without obvious rubbing.
• Compare the installed wheel's diameter, depth, hub, and mounting arrangement with the replacement and verify the appliance model before ordering.
• Do not assume the wheel is defective if airflow is poor; also consider the motor, vent duct, filters, controls, or other ventilation components.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM blower wheel for downdraft range and cooktop ventilation systems
• Attaches directly to the ventilation motor shaft
• Approximately 7 inches in diameter and under 4 inches deep, according to the U.S. parts listing
• Metal construction described as heat resistant
• Designed to restore airflow and reduce noise when the original wheel is worn or damaged

Installation Notes

• Shut off electrical power to the range or cooktop before installation.
• Wear work gloves because the blower wheel and surrounding sheet-metal components may have sharp edges.
• Access and removal steps vary by appliance model; follow the model-specific service or repair instructions.
• Mount the wheel on the ventilation motor shaft in the same orientation as the removed part and confirm that it spins freely without rubbing before restoring power.
• Verify the appliance model and the wheel's physical mounting details before installation; do not force a part that does not seat correctly.

Verified Compatible Models

2350EGS, 2360EGS, 2365, 2390ERS, 2490, 20236, 22001, 22116, 89891, 62946965, C101, C116-C, C203, C228, C300, CDE820, CVE1400B, CVE1400W-C, CVE4180S, CVE4180W, CVE4270W-C, CVE4370W, CVEX4100W, CVG316B, CVG4280B, CVG4380W, D146, G103, GO106, JDS9860AAB, JDS9860ACW, JDS9865BDP, JES9800AAQ, JES9800AAS, JES9800AAW, JES9800BAB, JES9860ACW, JES9900BAB, JGD8345ADW, R201, S101, S110, S156, S156B-C, SEG196, SVD8310SG, SVD8310SR, 22303(1988), 22304(1988), 22308(1988)

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.