Viking Range Corporation Range 30-inch Universal Manifold 002156-000, Replaces PA050113

OEM 30-inch universal gas manifold used in Viking ranges.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Multiple gas burners may have weak or absent gas flow when the manifold or its connections are leaking, obstructed, or damaged.
• A gas odor may be present around the manifold or connected gas fittings.
• Uneven or inadequate burner operation may occur when manifold gas distribution is compromised; other gas-supply or valve faults must also be ruled out.

Check Before Replacing

• If gas odor is present, turn off the appliance and the accessible gas shutoff valve, extinguish flames, and ventilate the area; do not operate the range until it has been checked.
• Visually inspect the manifold and accessible connections for impact damage, corrosion, loose tubing, or signs of leakage without disassembling the gas system.
• A qualified gas-appliance technician can perform a pressure and leak check of the manifold and connected fittings using an approved leak-detection method; never use an open flame.
• Confirm that the appliance model, serial-number revision, fuel type, and manifold identification agree before ordering or installing the part.

Pro Tip

Part Details

Key Features

• Viking OEM 30-inch universal manifold.
• Designed for use in Viking gas ranges.
• Listed as a replacement/substitution from Viking part PA050113.
• Gas-carrying component serving multiple range burner and oven circuits.
• Manufacturer documentation and parts listings identify it as the 30-inch universal manifold.

Installation Notes

• Gas-system service should be performed by a qualified gas-appliance technician in accordance with the appliance installation instructions and applicable local codes.
• Shut off the gas supply before service; disconnect electrical power where required by the appliance service procedure.
• Verify the replacement manifold and all connections against the appliance model and serial-number documentation before installation.
• After service, perform a complete gas-tightness check with an approved soapy-water or equivalent method; never use an open flame to test for leaks.
• Confirm the appliance fuel type and required manifold pressure from the specific range documentation; do not bypass or alter the appliance regulator.

Verified Compatible Models

CVDSC307AFTER120806, VDSC305AFTER120106, VGIC305, VGIC305-4BSS, VGIC305-4BWH, VGIC305DSI, VGIS300, VGRT300-4B, VGRT302, VGRT302AFTER070907, VGSC307, VGSC307AFTER120806

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.