Frigidaire Washer door boot seal / bellows, no light 137566001, Replaces 134434031, 137045610, 137566011, 5304472690, 5304503712

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible crack, tear, or split in the rubber bellows
• Water appearing around the washer door or front panel
• Mold, residue, or persistent odor in the door-seal area
• Bellows visibly pulled away from or improperly seated on the tub or front opening

Check Before Replacing

• Unplug the washer before inspection.
• Inspect the entire bellows for tears, cracks, pinholes, foreign objects, or heavy residue.
• Check that the bellows is seated evenly around the door opening and tub; do not stretch, cut, glue, or puncture it.
• If leakage is reported, observe the location of water during a supervised cycle only after confirming the door is securely closed; stop use if water reaches electrical components or the leak is substantial.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before beginning installation.
• The bellows is retained by an outer door clamp and an inner spring/clamp; inspect these retaining components before reuse and replace them if damaged or unable to hold the seal securely.
• Seat the replacement bellows evenly on both mating surfaces before reinstalling the retaining clamp or spring.
• After installation, inspect the seal for folds, twists, gaps, or pinched areas and verify that the door closes normally.
• Run a supervised test cycle and check for leakage before returning the washer to normal use.

Verified Compatible Models

970L48422E0, 41741122310, 41741122410, CFW4701QW0, CFW7400QW0, CFWH7300RW0, FAFW3001LW3, FAFW3001LW4, FFFW4000QW0, FFFW5000QW0, FFFW5100QA0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.