The 294D3298G002 is a genuine OEM refrigerator handle kit for GE French door and side-by-side refrigerators. Note: This part number has been superseded by WR01A02513, which is the current factory OEM replacement. If you are ordering a replacement handle, we recommend ordering WR01A02513 for the most current version. Limited stock of 294D3298G002 may be available for customers who specifically require this part number.

✓ Model-Specific Repair Pages

Don't see your model? Contact us and we'll confirm compatibility.

The 294D3298G002 handle kit uses stainless steel construction matched to GE's factory finish specifications. The kit includes the handle bar and end cap mounting hardware. Note: Some installations may also require the fastener kit PM36FZHANDLEKIT — check your existing door mounting holes before ordering.

✓ Common Symptoms Fixed

Refrigerator door handle broken or cracked | Handle pulling away from the door | Handle loose or wobbly | Handle missing entirely | Handle finish worn, scratched, or damaged | Door difficult to open due to failed handle

✓ Key Features & Specifications

Genuine GE OEM handle kit – stainless steel construction | Complete kit includes handle bar and mounting hardware | Superseded by WR01A02513 (current OEM) | Also replaces WR01A02062, WR01A02395 | Compatible with GE French door and side-by-side refrigerator models

✓ Buying Options

New / OEM (Superseded): The 294D3298G002 has been superseded by WR01A02513, which is the current factory OEM replacement. We recommend ordering WR01A02513 unless you specifically require the 294D3298G002 part number. If your mounting holes are stripped or damaged, also order the PM36FZHANDLEKIT fastener kit.

✓ Replacement Part Numbers

294D3298G002 (superseded) | WR01A02513 (current OEM) | WR01A02062 (superseded) | WR01A02395 (superseded)

✓ Installation Tips

No power disconnect required for this repair. The handle mounts to the exterior of the refrigerator door via screws accessible from inside the door edge or through the door gasket area, depending on the model. Remove the old handle by unscrewing the mounting screws, slide the new handle into position, and secure with the provided hardware. Ensure both end caps are fully seated before tightening. Repair difficulty: 1/5. Estimated time: 10–20 minutes.

✓ Compatible Models

DFE24JYRDKFS, GNE25DYRLKFS, GWE19JMLXFES, GWE19JYLGFFS, INF25FYRBCFS, PFE24HMLTKES, PFE24HYRMKFS, PFF25LYRBCFS, PFF25LYRCCFS, PNE25NMLTKES, PNE25NYRDKFS, PNF25FYRBCFS, PNF25FYRCCFS, PNQ25IMPCCES, PWO19JSRCFFS, PWR19JSRCFFS, PYE18HMLTKES, PYE18HYRMKFS, PYF19JYRCFFS

✓ Frequently Asked Questions

Is 294D3298G002 the same as WR01A02513? They are functionally equivalent, but WR01A02513 is the current factory OEM part number that supersedes 294D3298G002. We recommend ordering WR01A02513 for the most current version.

Do I need the fastener kit PM36FZHANDLEKIT? The handle kit includes standard mounting hardware. If your existing door mounting holes are stripped, damaged, or the original screws are missing, you will also need the PM36FZHANDLEKIT fastener kit.

Is this a difficult repair? Rated 1/5 difficulty. No tools beyond a screwdriver are required and most repairs take under 20 minutes. Contact us if you need model-specific installation guidance.