Frigidaire Range Surface element control switch 318293813, Replaces 318220003, 318220020, 318220063, 318293800, 318369602

Small single surface-unit control switch that turns a surface heating element on and off and regulates its heat output. Documented for use across ranges, cooktops, and wall ovens.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Surface element does not heat when turned on
• Surface element will not turn off
• Heat remains at high or cannot be adjusted
• Surface element heats intermittently or at an erratic level
• Burning odor or visible heat damage near the control-switch wiring

Check Before Replacing

• Confirm the range has electrical power and that the symptom is isolated to the surface unit controlled by this switch.
• With power disconnected and the appliance cool, inspect the switch terminals and nearby wiring for loose connectors, discoloration, melting, or burn damage.
• Check whether the control knob turns the switch normally and whether the problem follows the control position rather than the heating element.
• If the appliance has another surface element of the same size, compare operation using the appliance manufacturer’s service procedure; do not work on energized line-voltage wiring.
• If the element remains on after the control is turned off, disconnect power at the breaker or unplug the range and discontinue use until the switch and wiring are evaluated.

Pro Tip

Part Details

Key Features

• Frigidaire surface element control switch
• Small single surface-unit switch
• Also called an infinite switch or surface burner switch
• Regulates heat by controlling power delivered to the associated surface element
• Used in compatible electric ranges, cooktops, and wall-oven configurations
• Exact part identity is archived as Frigidaire 318293813

Installation Notes

• Disconnect electrical power at the breaker or unplug the range before servicing.
• Use the appliance’s model-specific service information and verify that 318293813 is the specified switch before installation.
• Remove the control-panel rear shield or access cover as required by the appliance design.
• Record wire placement before removing the old switch, then transfer the wires to the matching terminals on the replacement.
• Secure the replacement switch in the control panel, reinstall the control knob and access cover, then restore power and test only after all covers and connections are properly installed.
• Stop and use a qualified technician if wiring, terminals, or surrounding components show heat or arc damage.

Verified Compatible Models

14501-4, 79042492401, 79042492402, 79042493401, 79042493402, 79042494401, 79042494402, 79042499401, 79042499402, 79043492401, 79043492402, 79043493401, 79043493402, 79043494401, 79043494402, 79043499401, 79043499402, 79045062400, 79045062401, 79045069400, 79045072400, 79045074400, 79045079400, 79046122300, 79046122301, 79046123300, 79046123301, 79046124300, 79046124301, 79046129300, 79099513302, 79099513305, FEC30C4ABE, FEC30C4AQE, PGLEF387CS4

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.