LG Washer Door Gasket / Door Boot with Drain Port 4986ER0004F

Genuine LG OEM front-load washer door boot gasket that forms a watertight seal between the wash tub and door. This version includes a drain port. LG documentation identifies it as the LG Washer Door Gasket part 4986ER0004F.

Is This the Right Part?

Common Symptoms

• Visible tear, crack, hole, or deformation in the door boot
• Water or dampness collecting beneath the front door
• Door boot not seating evenly against the door or tub
• Persistent mildew or musty odor from moisture retained in the gasket folds
• Drain port at the bottom of the gasket blocked by debris

Check Before Replacing

• With the washer unplugged, visually inspect the entire gasket—including the lower fold and drain-port area—for tears, holes, cracks, or objects trapped in the seal.
• Confirm that the existing gasket has a drain port and note its position before ordering; this part is the drain-port version.
• Check that the gasket lip is seated evenly around the door opening and tub rim; do not operate the washer if the seal is visibly displaced or damaged.
• Inspect the drain port and gasket folds for lint, coins, or detergent residue that could obstruct drainage; remove only loose debris without cutting or puncturing the rubber.
• Wipe the gasket dry and inspect for persistent mold or odor; these findings support seal maintenance concerns but do not by themselves prove that gasket replacement is required.

Pro Tip

Part Details

Key Features

• Genuine LG OEM front-load washer door gasket/boot
• Integrated drain port
• Flexible rubber sealing construction
• Designed to seal the washer door opening to the wash tub
• Listed by LG as a replacement washer gasket

Installation Notes

• Disconnect power before inspecting or replacing the gasket.
• Record the position of the drain port and any alignment marks on the original gasket before removal.
• During installation, align the drain port at the bottom of the opening and ensure the inner and outer gasket lips sit evenly in their respective grooves.
• Reinstall the retaining clamps or bands according to the service instructions for the exact washer model; do not run the washer until the gasket is evenly seated and the clamps are secure.
• After installation, inspect for pinched or rolled sections of rubber before performing a cautious leak check.

Verified Compatible Models

796.40272800, 796.40272900, 796.40311900, 796.40318900, 796.41172211, 796.41272211, CW2079CWD, CW2079CWN, WM0001HTM, WM0642HS, WM2050CW, WM2075CW, WM2077CW, WM2101HW, WM2277HW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.