WASHER DOES NOT OPERATE OR LOSES CONTROL OF ONE OR MORE CYCLE FUNCTIONS
Samsung Main PCB Assembly / Washer Electronic Control Board DC92-01803K, Fixes Washer does not operate or loses control of one or more cycle functions
Genuine Samsung main electronic control board for a washer. It manages washer operations including filling, washing, draining, and spinning.
Part DC92-01803KSamsung
Genuine Samsung main electronic control board for a washer. It manages washer operations including filling, washing, draining, and spinning.
Is This the Right Part?
Part NumberDC92-01803K
ManufacturerSamsung
Appliance TypeWasher
Part TypeMain PCB Assembly / Washer Electronic Control Board
Common Symptoms
- Washer will not start or becomes unresponsive
- Cycle fails to advance or stops unexpectedly
- Washer does not energize a commanded function such as water filling
- Washer may click as the control attempts to activate a component
Check Before Replacing
- Confirm the washer is receiving power and that the circuit breaker or fuse has not tripped.
- Unplug the washer before inspecting the control board, wiring, and connectors.
- Inspect accessible board connectors and harnesses for looseness, visible damage, corrosion, or heat discoloration.
- Check whether the observed symptom may instead involve the separate user-interface board, door-lock system, water valves, drain system, or inverter.
- Use the washer’s approved service-diagnostic procedure and error-code guidance before condemning the control board.
Pro Tip
Because the main board can be misdiagnosed, verify power, harness connections, and related components first; an unresponsive button or display issue may involve the separate user-interface board rather than the main PCB.
Part Details
Part NumberDC92-01803K
Part TypeMain PCB Assembly / Washer Electronic Control Board
ManufacturerSamsung
Appliance TypeWasher
Primary FunctionInterprets washer switch, button, and sensor signals and controls the washer’s filling, washing, draining, and spinning operations.
Key Features
- Genuine Samsung washer main electronic control board
- Main PCB assembly identified for the WF6200K platform
- Controls signals from washer switches, buttons, and sensors
- Supports coordinated filling, washing, draining, and spinning functions
- Exact manufacturer part number: DC92-01803K
Installation Notes
- Disconnect electrical power before servicing or replacing the board.
- Verify the replacement board’s part number and washer model revision before installation.
- Document connector locations before disconnecting the original board and reconnect each harness securely in its original location.
- Inspect for loose or damaged wiring before installing the replacement board.
- After reassembly, restore power and run the washer’s applicable service or functional check according to the model’s service documentation.
Verified Compatible Models
WF42H5200AP/A2-00, WF45K6200AW/A2-00, WF45K6200AW/A2-11, WF45K6200AZ/A2-00, WF45K6200AZ/A2-01, WF45K6200AZ/A2-11
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
