Samsung Range Burner Not Heating Evenly? Surface Element DG47-00022A – Fix Dual Burner Failure Fast

Uneven heat, hot spots, or a burner that won't stay on are the most common signs of a failing radiant surface element in Samsung electric ranges. In most Samsung ranges, this is caused by a burned-out or degraded dual radiant surface element. When it fails, one or both heating zones stop responding — leaving you with inconsistent cooking temperatures, wasted energy, and a cooktop you can't rely on. ⚡ Common failure point in Samsung electric ranges after extended high-heat use. Part DG47-00022A is the genuine OEM replacement that restores full dual-zone heating performance and precise temperature control immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and other burners work normally
• ✔ Oven and controls function correctly — only the surface element is affected
• ✔ Electrical supply confirmed OK — no tripped breaker or blown fuse
• ✔ The burner socket and wiring harness are undamaged
• ✔ ONLY problem is this specific dual burner not heating, heating unevenly, or cycling off unexpectedly

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Burner not heating at all — most common, what customers Google
• Burner heats on one zone only — inner or outer ring not working
• Uneven heat distribution — hot spots and cold spots across the element
• Burner cycles off unexpectedly during cooking
• Visible burn marks, cracks, or blistering on the element surface
• Range display shows error code related to surface element or heating circuit

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this dual radiant surface element restores full heating performance immediately.

📦 Part Details

• Part Number: DG47-00022A
• Type: Range Surface Dual Radiant Burner Element
• Replaces: OEM direct-fit Samsung surface element — DG47-00022A (no modification required)
• Brands: Samsung
• Design: Dual-zone radiant element with inner and outer heating rings for flexible cooking

⚙️ Installation

Skill Level: EASY — 15–25 minutes. Disconnect the range from power at the breaker before starting — do not rely on the surface controls alone. Lift the cooktop or access the element from above depending on your model, disconnect the wiring harness from the element terminals, remove the mounting hardware, and swap in the new DG47-00022A. Ensure all terminal connections are fully seated and secure before restoring power and testing all heat settings.

✓ Compatible Models

Confirmed compatible with Samsung electric ranges equipped with the DG47-00022A dual radiant surface element. Contact us to verify your model number before ordering.

💡 Pro Tip

Part Hubs: DG47-00022A Part Hub, Samsung Range Parts