Whirlpool Dishwasher Pump and Motor Assembly W10428773, Replaces 675750, 675771, 675793, 675793A, 8051313, 8051314, 8051315, 9743200, 9743201, 9743202

Genuine Whirlpool dishwasher pump and motor assembly that circulates water through the spray arms during the dishwashing cycle. Sources describe the assembly as including a self-cleaning filter; Parts Dr also states that it includes an instruction sheet and that the counterbalance weight is no longer required for the new motor.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Loud or unusual pump-area noise
• Poor or absent spray-arm movement
• Dishwasher does not drain properly
• Water leaking from the pump or motor area
• Reduced wash-water circulation

Check Before Replacing

• Disconnect electrical power before servicing.
• Inspect the spray arms and filter/sump area for visible debris or blockage, and clean only accessible debris without disassembling the assembly.
• During a cycle, observe whether the spray arms move and listen for abnormal grinding or pump-area noise, without placing hands inside the operating dishwasher.
• After safely removing access panels, inspect the pump-area hoses, wiring connectors, and gasket area for visible disconnection, damage, or leakage.
• Confirm that the dishwasher fills with water before evaluating wash-pump circulation; filling or control problems can produce similar symptoms.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool pump and motor assembly
• Complete assembly with self-cleaning filter
• Designed to circulate water through the spray arms
• Instruction sheet is included according to the documented product listing
• Updated motor design may eliminate the counterbalance-weight requirement

Installation Notes

• Turn off electrical power before beginning service.
• Remove the lower dish rack and lower wash arm as required for access.
• Remove the lower access panels and disconnect the applicable hoses, wiring connectors, grounding wire, and thermistor connections.
• Release the old assembly from the sump by rotating its mounting tabs, then remove it carefully because residual water may spill.
• Transfer only the applicable filter or outlet components when required by the old-versus-new configuration.
• Clean the accessible sump opening, lubricate the assembly gasket with a small amount of liquid dish soap or rinse aid as shown in the part-specific instructions, and seat the new assembly evenly in the sump opening where applicable to the model procedure із the source instructions.

Verified Compatible Models

DP920PFGQ1, DP920PFGQ2, DP920PFGQ3, DP920PFGY0, DP920PFGY1, DP920PFGY2, DP920PFGY3, DU920PFGB0, DU920PFGB1, DU920PFGQ0, DU920PFGQ1, DU920PFGQ3, DU920PFGZ1, DU920PFGZ3, SUD6000HQ0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.