Whirlpool Corporation Microwave Outer Door, Black W10594298

Black outer door for a 1.9 cubic foot microwave hood combination. The manufacturer parts list identifies W10594298 as the black outer door; the stainless counterpart is W10594302.

Is This the Right Part?

Common Symptoms

• Visible cracking, warping, or separation of the black outer door panel
• Door does not sit or close evenly after impact or damage
• Door operation becomes stiff or requires unusual force because of suspected door misalignment
• Cosmetic damage to the black exterior door while the inner door assembly remains intact

Check Before Replacing

• Disconnect electrical power before inspecting the door or removing panels.
• Visually inspect the outer door for cracks, warping, separation, impact damage, or loose sections.
• Open and close the door gently and confirm that it moves smoothly and closes fully without forcing it.
• Inspect the visible hinge, latch, door-seal, and sealing-surface areas for damage, looseness, or obstruction.
• Do not operate the microwave if the door glass is broken, the door does not close properly, or the hinges, latches, seals, or sealing surfaces are damaged; microwave safety checks and leakage verification should be performed by qualified service personnel after repair.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool/Jenn-Air outer-door component identified as Door, Outer (black)
• Black finish; the stainless outer-door counterpart is separately identified as W10594302
• Used as item 5 in the applicable model parts diagrams
• Designed to work with the microwave door’s inner assembly, hinge, latch, and sealing components

Installation Notes

• Disconnect power before beginning any door work.
• Door replacement requires transferring or reinstalling associated inner-door, hinge, latch, and related components according to the model-specific service instructions.
• Protect the door and its glass surfaces from impact during handling, and watch for sharp sheet-metal edges during disassembly.
• After reassembly, verify that the door closes correctly and that the hinges, latches, seals, and sealing surfaces are properly aligned.
• Do not return the microwave to service if the door, glass, hinges, latches, seals, or sealing surfaces are damaged; qualified personnel should perform the required microwave leakage and safety checks.

Verified Compatible Models

JMV9196CB0, JMV9196CB1, JMV9196CS0, JMV9196CS1, YJMV9196CB0, YJMV9196CS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.