Whirlpool Range Induction Surface Element W10636723 – Superseded by W11672688

Genuine Whirlpool OEM induction surface element used as the left-front and left-rear cooktop element in documented 30-inch induction slide-in ranges.

Is This the Right Part?

Common Symptoms

• The left-front or left-rear zone fails to heat while another zone operates normally.
• The zone does not maintain normal heating when a suitable pan is correctly positioned, after basic cookware and control checks have been completed.
• The zone may stop heating when pan detection is lost or when the cooktop detects unsuitable, undersized, or improperly positioned cookware; this does not by itself prove element failure.

Check Before Replacing

• Confirm the affected zone is selected and the control lock is not active.
• Test with a flat-bottomed, induction-compatible pan; verify that a magnet sticks to the pan bottom.
• Center cookware over the affected cooking area and use a pan base approximately matching the element diameter.
• Compare the affected zone with another zone using the same compatible pan and setting.
• Inspect the glass surface from above for visible cracks or impact damage; do not operate a cooktop with cracked glass.
• If the zone remains inoperative, disconnecting or electrically testing the induction element should be left to a qualified appliance technician because the range contains hazardous electrical voltage.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM induction surface element.
• Documented for the left-front and left-rear cooktop positions.
• Works as part of an induction heating system that heats compatible cookware through an electromagnetic field.
• Used in documented 30-inch induction slide-in ranges.
• Archived manufacturer replacement: W11672688.

Installation Notes

• Disconnect the appliance from electrical power before any service work.
• Allow the cooktop to cool completely before handling components near the glass surface.
• This is an internal induction-range component; removal and electrical connections should be handled by a qualified appliance technician.
• Verify the replacement part number and the appliance model before installation; do not substitute a radiant or conventional coil element.
• After service, confirm that the affected zone operates with a suitable, centered induction pan and that the glass surface remains intact.

Verified Compatible Models

JIS1450CDP0, JIS1450CDS0, JIS1450DP0, JIS1450DP1, JIS1450DP2, JIS1450DS0, JIS1450DS1, JIS1450DS3, KSIB900ESS0, KSIB900ESS1, KSIB900ESS2, KSIB900ESS3, YKSIB900ESS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.