POOR OR ABSENT WATER CIRCULATION
Whirlpool Dishwasher Circulation pump and motor assembly W10847562, Replaces W10739633, Fixes Poor or absent water circulation
Genuine Whirlpool OEM dishwasher circulation pump and motor assembly that circulates wash water through the spray arms.
Part W10847562Replaces W10739633Whirlpool
Genuine Whirlpool OEM dishwasher circulation pump and motor assembly that circulates wash water through the spray arms.
Is This the Right Part?
Part NumberW10847562
ReplacesW10739633
ManufacturerWhirlpool
Appliance TypeDishwasher
Part TypeCirculation pump and motor assembly
✅ Cross Reference Information
Current Part NumberW10847562
ReplacesW10739633
Common Symptoms
- Dishwasher does not clean dishes effectively
- Spray arms do not spin or have weak spray
- Unusual circulation-pump noise or continuous motor drone
- Dishwasher may stop mid-cycle when the circulation motor fails
- Possible leakage from the pump/motor area
Check Before Replacing
- Confirm the dishwasher fills with water and that the spray arms are unobstructed before suspecting the circulation assembly.
- During operation, listen for the circulation motor and check whether the spray arms receive normal water pressure; weak or absent spray supports a circulation problem but does not by itself prove pump failure.
- If safely accessible, inspect the pump inlet area for visible debris or restriction with electrical power disconnected.
- Check the wiring harness and connectors for visible looseness, damage, or corrosion with the dishwasher unplugged or the circuit breaker switched off.
- Do not rely on noise alone for diagnosis; control, wiring, inlet, spray-arm, or blockage problems can produce similar cleaning symptoms.
Pro Tip
A continuously droning motor can indicate worn pump-motor bearings, but first rule out an obstructed inlet and verify that the assembly is receiving power before replacing it.
Part Details
Part NumberW10847562
Part TypeCirculation pump and motor assembly
ManufacturerWhirlpool
Appliance TypeDishwasher
Primary FunctionCirculates dishwasher wash water through the spray arms during the cleaning cycle.
Cross ReferencesW10739633
Key Features
- Genuine Whirlpool OEM circulation pump and motor assembly
- Integrated pump-and-motor replacement assembly for dishwasher wash-water circulation
- Listed as replacing Whirlpool part W10739633
- Delivers wash water to the dishwasher spray arms
Installation Notes
- Disconnect electrical power by unplugging the dishwasher or switching off the house circuit breaker before installation.
- Wear work gloves because access to the pump area may expose sharp metal or component edges.
- Inspect and reconnect the wiring harness and water connections carefully, checking for visible leaks after reassembly.
- Use the appliance’s model-specific service information or parts diagram for access and connection details; installation access varies by dishwasher model.
Verified Compatible Models
ADB1100AWB5, ADB1100AWS5, ADB1100AWW5, ADB1300AFB0, ADB1300AFS0, ADB1300AFW0, WDF110PABB4, WDF110PABS4, WDF110PABT4, WDF110PABW4, WDF111PABB4, WDF111PABW4
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
