Whirlpool Corporation Stainless Steel Burner Knob / Range Surface Burner Knob, Left Front W10872674, Replaces W10579761, W10786064

Genuine OEM stainless-steel surface-burner control knob for a range. The knob controls the heat of the range surface burner and is identified by Sears PartsDirect as the left-front burner knob.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Knob falls off or feels loose/wobbly on the control shaft.
• Knob is difficult to turn or does not reliably change the burner setting.
• Cracked or broken internal stem/retainer prevents the knob from seating securely.
• Missing knob leaves the burner-control shaft exposed and difficult to operate safely.

Check Before Replacing

• With the range off and cool, visually inspect the knob for cracks, damage, or a missing internal retainer/insert.
• Check whether the knob is seated fully on the correct control shaft and whether it rotates smoothly without excessive wobble.
• Remove the knob by pulling it straight off, then inspect the control shaft and the knob’s internal opening for visible damage or misalignment.
• Compare the knob’s position and markings with the left-front burner location and the appliance parts diagram before ordering.
• If the knob cannot reliably control the burner setting, do not operate that burner until the knob and underlying control are evaluated.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM range surface-burner control knob.
• Stainless-steel finish.
• Specified for the left-front surface-burner position on applicable ranges.
• Replaces archived Whirlpool numbers W10579761 and W10786064.
• Designed to fit over the burner-control shaft and provide marked heat-setting control.

Installation Notes

• Turn the range off and allow the cooktop to cool before replacement.
• Pull the existing knob straight off its control shaft; do not force or pry against the control panel.
• Align the replacement knob with the control shaft and press it fully into place.
• Confirm that the knob is seated securely and turns smoothly before using the burner.
• Use the appliance owner’s manual and model-specific instructions if the knob does not fit or operate normally.

Verified Compatible Models

JGS1450ML0, KSDB900ESS0, KSDB900ESS1, KSDB900ESS2, KSDB900ESS3, KSDB900ESS4, KSGB900EBL0, KSGB900ESS0, KSGB900EWH0, KSGG700EBL0, KSGG700EBL1, KSGG700EBS1, KSGG700ESS0, KSGG700ESS1, YKSDB900ESS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.