WASHER DOES NOT AGITATE OR MOVE CLOTHES EFFECTIVELY
Whirlpool Washer Agitator Assembly W10908289, Replaces W10680205, W10680208, Fixes Washer does not agitate or move clothes effectively
Whirlpool OEM washing-machine agitator assembly that rotates back and forth to move clothes through the wash tub.
Part W10908289Replaces W10680205, W10680208Whirlpool
Whirlpool OEM washing-machine agitator assembly that rotates back and forth to move clothes through the wash tub.
Is This the Right Part?
Part NumberW10908289
ReplacesW10680205, W10680208
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeAgitator Assembly
✅ Cross Reference Information
Current Part NumberW10908289
ReplacesW10680205, W10680208
Common Symptoms
- Agitator does not move during the wash portion of the cycle
- Agitator spins freely or slips instead of producing effective washing action
- Clothes are not being repositioned or cleaned effectively
- Visible cracks, chips, or other physical damage to the agitator
- Grinding or squeaking during agitation
Check Before Replacing
- Unplug the washer before inspection.
- With the washer empty and powered off, visually inspect the agitator for cracks, broken vanes, or other damage.
- Check whether the agitator is unusually loose or spins freely by hand; do not force it.
- If the agitator does not move during a wash cycle, verify that the symptom is limited to agitation before replacing the part, since other washer components can also affect agitation.
Pro Tip
If the agitator is slipping or spinning freely, inspect the agitator and its drive interface for wear or damage; do not assume the agitator is the only possible cause of an agitation problem.
Part Details
Part NumberW10908289
Part TypeAgitator Assembly
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionWhirlpool OEM washer agitator assembly that rotates back and forth to move clothing through the wash water.
Cross ReferencesW10680205, W10680208
Key Features
- Whirlpool OEM agitator assembly
- Designed for top-load washing machines
- Oscillates back and forth to move clothing through the tub
- Sold as an agitator assembly rather than as a separate agitator repair kit
- Exact manufacturer part number: W10908289
Installation Notes
- Disconnect electrical power before installation.
- Wear work gloves to protect hands from sharp edges.
- The assembly is secured through the center of the agitator; access to the fastener may require removing the agitator’s top cap or dispenser component, depending on the washer design.
- After removing the retaining fastener, the old agitator is removed and the replacement is seated onto the drive interface; confirm it is secure before operating the washer.
- Follow the appliance-specific service instructions for the exact washer model.
Verified Compatible Models
4KATW4830EW0, 4KMVWC130EQ0, 4KMVWC230EW0, 4KNTW4430EQ0, 4KNTW4530EQ0, 4KWTW4730EQ0, 4KWTW4830EQ0, ATW4675EW0, CAW8350EW0, CAW9352EW1, ITW4671EW0, ITW4771EW0, NTW4605EW0, NTW4615EW0, NTW4635EW0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
