Whirlpool Washer Door Bellow W11173364, Replaces W10900509, WPW10474364, W10474364

Door boot seal/bellow that forms a seal between the wash tub and door to help prevent leaks.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible tears, cracks, or punctures in the rubber boot
• Mildew, residue buildup, or persistent odor on the seal
• Door does not close or lock correctly because the boot is damaged or misaligned
• Water collecting in the bottom fold because the boot’s drain openings are obstructed or incorrectly positioned

Check Before Replacing

• Disconnect electrical power before inspection.
• With the washer empty, visually inspect the entire accessible boot for tears, cracks, punctures, deformation, trapped objects, or separation from its seating surfaces.
• Check whether the leak originates at the door boot rather than another nearby component before replacing the seal.
• Inspect the bottom drain openings in the boot for visible residue or obstruction and confirm they are positioned at the bottom.
• Verify that the boot is not folded into the door-closing path or visibly misaligned.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM washer part
• Flexible rubber construction
• Creates a watertight barrier between the front-load washer door and drum/tub
• Designed for select Whirlpool and Maytag front-load washers
• Supersedes W10900509, WPW10474364, and W10474364

Installation Notes

• Disconnect electrical power before installation; shutting off the washer’s water supplies is also recommended.
• Replacement requires access to the boot mounting area and some washer disassembly; exact access steps vary by model.
• The boot is retained by mounting rings or clamps; preserve and correctly reseat the applicable retainers during installation.
• Clean visible residue and debris from the sealing surfaces before fitting the replacement.
• Align the boot correctly, including its lower drain openings, before reassembly.
• Confirm the door closes and latches normally, then check for leaks during a controlled test cycle.

Verified Compatible Models

7MWFW94HEBU0, BNQ11DCANA0, MHW7000AG0, MHW7000AG2, MHW7000AW0, MHW7000AW2, MHW7000XG2, MHW7000XR2, MHW7000XW2, WFL98HEBU0, WFW92HEFBD0, WFW92HEFC0, WFW92HEFU0, WFW92HEFW0, WFW97HEXL2, WFW97HEXL3, WFW97HEXR2, WFW97HEXR3, WFW97HEXW2, WFW97HEXW3, WFW9290FBD0, WFW9290FC0, WFW9290FW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.