Whirlpool Refrigerator Defrost Heater Assembly W11650659 W11573115, Fixes Frost or ice buildup on the freezer evaporator that restricts airflow and reduces cooling
Genuine Whirlpool refrigerator defrost heater and wire-harness assembly. The heater melts frost from the freezer evaporator coils during the defrost cycle.
Genuine Whirlpool refrigerator defrost heater and wire-harness assembly. The heater melts frost from the freezer evaporator coils during the defrost cycle.
Is This the Right Part?
Common Symptoms
- Freezer evaporator coils heavily frosted or iced over
- Refrigerator or freezer not defrosting normally
- Refrigerator runs for unusually long periods
- Freezer cooling is reduced because ice blocks airflow
- Fresh-food compartment is warm while the freezer remains cold
Check Before Replacing
- Disconnect power before accessing the heater assembly or wiring.
- Visually inspect the evaporator area for excessive frost or ice buildup; this symptom alone does not prove the heater is defective.
- With power disconnected and the assembly safely accessible, a qualified person may check heater continuity with a multimeter; an open circuit indicates the heater assembly may be defective.
- Use the refrigerator’s model-specific service diagnostics, if available, to test the defrost-heater circuit; do not perform live-voltage testing unless qualified and following the appliance tech sheet.
- Check the heater harness and connectors for visible damage, loose connections, or signs of overheating.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM defrost heater assembly
- Integrated heater-and-wire-harness design
- Designed for selected Whirlpool, Amana, and Admiral refrigerators
- Heats the evaporator coil area during automatic defrost
- Whirlpool part number W11650659
Installation Notes
- Disconnect electrical power before servicing.
- Use the appliance’s model-specific service documentation and verify fitment before installation.
- Protect the evaporator tubing and wiring while removing or positioning the assembly.
- Reconnect the harness exactly as the original assembly was routed and connected; do not alter connector locations or wiring routing.
- After installation, confirm that connectors are fully seated and that wiring is clear of sharp edges, moving parts, and the evaporator fan.
- Do not force frozen components; allow ice to thaw using a safe method appropriate for the appliance before attempting removal.
Verified Compatible Models
ASI2175GRB07, ASI2175GRB09, ASI2175GRB10, ASI2175GRS07, ASI2175GRS09, ASI2175GRW07, ASI2175GRW09, ASI2175GRW10, WRS311SDHB09, WRS311SDHB10, WRS311SDHM11, WRS311SDHM12, WRS311SDHT09, WRS312SNHB05, WRS312SNHB06
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
