Whirlpool OEM Appliance Part W10219463

Is This the Right Part?

Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.

• Refrigerator not cooling or freezer not freezing
• Temperature error codes displayed on the control panel
• Compressor runs continuously or not at all
• Refrigerator behaves erratically — fans cycling incorrectly, defrost not running

• Verify the power supply and outlet are functioning — rule out a tripped breaker or failed outlet before condemning the board
• Check the thermistor/temperature sensor — a faulty sensor can send incorrect readings that mimic a board failure
• Inspect the evaporator fan and condenser fan motors — a seized fan can cause the board to shut down the cooling cycle
• Confirm the error code against the service manual — some codes point to sensors or wiring harnesses, not the board itself

1. Disconnect power to the refrigerator before servicing.
2. Photograph all wiring harness connections and connector positions before removal.
3. Compare the new W10219463 board with the original before installation.
4. Inspect the wiring harness connectors for burn marks, corrosion, or loose pins.
5. Restore power and verify cooling operation — check for error codes and confirm temperature recovery.

Part Details

Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.

Compatible with select Whirlpool refrigerator models. Contact us with your full model number to confirm fitment before ordering.

⚠️ This part has been discontinued by Whirlpool and is no longer available (NLA) through standard distribution channels. If you need this board, this listing represents remaining available stock. Once sold, no further restocking is possible. Confirm fitment by matching the complete model number before ordering.

The Whirlpool W10219463 Electronic Control Board is designed to manage temperature regulation, compressor cycling, defrost timing, and fan operation in select Whirlpool refrigerators. It replaces 2223443, 2252111, 2303934, 2307005, 2307028, 2307028R, and W10185291 when fitment is confirmed by the appliance model number.

Confirm the complete model number before ordering. Similar control boards may differ in connector layout, software version, or mounting configuration.