WASHER DOES NOT DRAIN OR LEAVES STANDING WATER AFTER THE CYCLE
Whirlpool Washer Drain pump assembly / remote-style pump with motor WP22003059, Fixes Washer does not drain or leaves standing water after the cycle
Genuine Whirlpool OEM drain-pump and motor assembly for Maytag and Whirlpool laundry appliances; 120 volts, 60 Hz, 80 watts, with check valve. It removes wash water during the drain cycle.
Part WP22003059Replaces 22001982, 22002550, 22002794, 22002939, 22003059Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP22003059
Replaces22001982, 22002550, 22002794, 22002939, 22003059
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeDrain pump assembly / remote-style pump with motor
✅ Cross Reference Information
Current Part NumberWP22003059
Verified Previous OEM Numbers22001982, 22002550, 22002794, 22002939, 22003059
Common Symptoms
- Slow or incomplete draining
- Unusual humming or noisy pump operation during drain
- Water leaking from the pump housing or hose connections
- Pump runs but little or no water is discharged
Check Before Replacing
- Disconnect power before servicing and close the washer's water supplies.
- Check the drain hose for kinks, blockage, or improper routing.
- Inspect accessible pump hoses and the pump inlet for foreign objects or accumulated debris; do not disassemble the pump while energized.
- Check that the pump's electrical connector is fully seated and that wiring is not visibly damaged.
- If the washer still will not drain after external hose and obstruction checks, verify the appliance-specific service procedure before condemning the pump, since a control, wiring, or drain-path fault can produce similar symptoms.
Pro Tip
Before replacing the pump, inspect the tub-to-pump hose and pump inlet for small objects such as coins, pins, or lint buildup; an obstruction can cause no-drain, noise, or leakage symptoms and may not require pump replacement.
Part Details
Part NumberWP22003059
Part TypeDrain pump assembly / remote-style pump with motor
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionPumps wash water out of the washer during the drain portion of the cycle; the assembly includes the pump motor and a check valve.
Installation Notes
- Disconnect electrical power before installation and turn off the washer's water supplies.
- Drain or otherwise control residual water before disconnecting pump hoses.
- Access requirements vary by washer model; the repair may require removing a rear or lower access panel.
- Disconnect the pump wiring and hoses carefully, noting hose and connector positions before removal.
- Inspect hose connections and the pump inlet for debris during replacement, then restore all connections and panels before operating the washer.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
